Kit

Wow that is heirloom/artifact quality. Absolutely amazing

I'm hoping to make it to see and learn some things. Tentatively plan on going on Saturday.

Oh that would definitely help give you leverage and security when using the gut hook, nice idea

Holy cow that is a work of art I love Maple burl how long is the blade? I love the file work on the spine, how is the comfort when using it?

Alright, I have it posted for trade, hopefully someone takes the bait. I looked up that forge. That is right on what I was thinking for a tuyere pipe setup, that's like the perfect size for anything I plan on doing too

I looked at the itinerary I should be able to get someone to cover a shift for me one of those days would Saturday or Sunday be a better day to attend? I did not realize that that clay would work that stuff is readily available I was thinking of soft Red River clay. And I'm very glad to hear the hardwood lump is a very viable fuel source I always have quite a stock of that on hand for grilling and smoking anyway

I read the 55 and jabod posts, if I went with one or the other it would be the 55 because there is a place local that sells them for 4 bucks a pop and it's hard to find clay in my neck of the woods. I guess I was just wanting to use those xxxx brake drums lol. I suppose Did that turn out to be steel I can cut them up and make stuff. And your harbor freight idea. I may or may not have gone through that thought process, but in reading I realized that not all fire is the right fire the computer fan I might do some more research on because I have that stuff laying around. Thank you for the reply, I'll head back into reading more again

I wasn't sure where to post this so I will just add this here. I am keeping my eyes and ears open for an anvil or something usable as such. Being in farm country in bound to come across something in relatively decent time. My point to this, I have two semi tractor brake drums (originally destined to be painted orange and put at 100 and 200yds as rifle targets), I know from reading that outright they dont make the best forges due to depth. An idea I had was to cut one in half and then weld it back together in a canoe shape (cutting it vertically if the wheel stud holes are facing up, the welding the two edges that would have been facing back towards the semi) I don't have the exact measurements (they are out at my parents house, haven't made it out to measure them), by my rough estimate it would put me at about 6 or 7inches deep at the center and probably 20ish inches long. Obviously intending on solid fuel. Not sure if this would be appropriate size wise. Another thought would be to bolt a thick piece of steel to the stud holes via welded on studs, then reinforce the hollow with rebar and fill it with concrete. If concrete doesn't have anywhere to go it should withstand the percussive forces. Also of my fellow fireman is a structural engineer specializing in structural concrete and steel, so I could pick his brain on the right mix. Obviously my plans are semi-contingent on the drums being steel and not cast which is yet to be determined. Another thing I was curious about, has anyone used a 12v computer case fan with a trimpot for air supply to a forge, obviously with enough pipe to keep the fan from melting, most of those fans move about 90ish CFM which should be enough air right? Sorry for the long winded post, just trying to figure things out on the cheap Oh, and how does hardwood lump charcoal do as a fuel, I'm talking like royal oak or stubbs style, NOT kingsford brickette style. Thank you for your patience with a newbie.

I'm not sure, but I'm tuned it so I can follow this

Hey, go komets! My grandparents live right off of liberty mills and homestead. I make my way up there every now and again, they have season tickets. I will check him out for sure, IBA is Indiana blacksmiths association? I will look that up for sure Thank you to both of you for the kind words

I'm an EMT for Tippecanoe County, Indiana (the county Purdue University is in), I am also a volunteer firefighter. Blacksmithing has always been intriguing to me, after recently discovering the show Forged in Fire, (I have read mixed reviews by blacksmiths who say it tends to misrepresent the craft and adds flashiness) but either way it piqued my interest to look into the craft. I don't have anything yet to start in the hobby but I am actively researching, reading, watching videos, etc. My initial plan would be to start with a hammer, a fire, and something to hammer on, and work my way through making chisels, punches, cutters, tongs, and eventually my own hammers before moving on to making other pieces. Some of my other hobbies/interests are firearms, I dabble in woodworking, I also enjoy smoking meat, a good cigar with a decent brown colored drink, I have a wonderful wife and she had a nephew that we love to spoil. I look forward to learning all that I can here. -Kit