Jump to content
I Forge Iron

Mastershimself

Members
  • Posts

    1
  • Joined

  • Last visited

Everything posted by Mastershimself

  1. Hello, Mounting the burner into the forge; Weld a pipe (as a sleeve) over your burner opening(on the forge) and tap a few bolts in the sleeve for adjustment. This will allow you to move your burner in and out for adjustment as you see fit. The sleeve should be just large enough for you to get your burner down through. Burner flare; the burner flare is usually an essential part of the burner. It should also be tapped on with a set screw so you can adjust it on the burner tip. The adjustment of your burner inside your forge and the adjustment of your burner flare are needed to get the most proficient flame. So however you plan to fasten the burner, allow for adjustment. Also, even if your flare is barely inside the forge, it will get real hot. Many choose to use a stainless flare for this reason. You can also find good ideas looking at flare pictures through the images section of google search.. Good luck
×
×
  • Create New...