BlasterJoe

Members
  • Content Count

    189
  • Joined

  • Last visited

About BlasterJoe

  • Rank
    Senior Member

Profile Information

  • Gender
    Male
  • Location
    Round mountain NV
  • Interests
    Hunting, Blacksmithing,
    @Lock_Jaw_Forge on IG

Recent Profile Visitors

2,778 profile views
  1. I did water quench it just for good measure. Aus It is a pity. I think it will be sturdy enough not hardened. I wouldn't go much thinner than an 1/8 inch round on the screw. I will let you know if we run into any problems as we use it. Rockstar, That's a good idea on the twists. its not the most comfortable right now so I might do that with this one.
  2. New idea for business card holder. 1” x 1/4 flat stock.
  3. Made this cork screw out of a railroad spike. I used Mark Aspery’s pass through technique. This is my first go and it’s pretty rough. I will definitely be making more.
  4. I’m glad to finally see this. I recently have been doing demonstrations and helping teach beginner classes at the Historical Tonopah Mining park.
  5. Made the punches so I can make more of these skull openers.
  6. Thanks Flatliner, I took it out in the mountains the other day and chopped some fire wood. then gave it to the boys and let them put it through its paces. Did some throwing and ice chopping. it did well still holding the edge well.
  7. Thanks Thomas. This has quickly became my favorite tool. The same effect can be done with a striker and top and bottom fullers but this is much easier for a single man operation as my self. I have used it to draw out quills on feathers and even collapse pipe down for peppers and candle holders with lighter taps. Thomas, can you please show me your swing arm fuller or send me the link if you already put it out. It sounds interesting.
  8. Yup. Fullered the quill out and used a cross pien for the texture. I have a railroad spike tomahawk I made along time ago that I use to chop in the edge splits.
  9. Just finished the order for all 22. The client was very happy. I learned a lot through the process. By the end I was working 3 at once and got my time down to a half hour apiece. I didn’t make any money on it but it is for a good cause and good exposure. Forgot to pictures. The last one is my first one and last one. Big difference
  10. For all of you on Instagram I recently started  dipping my toe in social media. Check me out @incitatus_forge

    Thanks Joe

    1. BlasterJoe

      BlasterJoe

      Decided to change the forge name before I get any deeper into this. The name is now lockjaw forge

  11. This is little Bea. She’s 1 year yellow lab. She’s like my daughters. Comes in to watch me work and falls asleep. I must be a pretty rhythmic hammerer.
  12. Thanks for the great input. These will be for both demonstrations and for gaining interest for buyers. Thanks again and I will post some more pics from the demos and fair
  13. I made my first rounding hammer. I made it from a worn out loader bucket pin. 4140. Water quenched faces. No cracks. Drew the temper with the drift I made. Feels really good to finally get it done. It’s always been my real blacksmith project. Need a tool/make a tool.
  14. Frosty. First picture was first day second was second. It’s healing up well. It’s peeling like a tattoo. Did a little burn gel first day then neosporin. As to the way it happened I was making a spring fuller. I had the piece that goes in the hardie forged in and needed the large hoop on the back. Both ends were cold and the middle was hot. I was bending the hoop around the horn of my anvil. For some reason I squatted down in front while holding onto the cold ends and started bending. It cooled quickly and I thought I could get that last little bit done before reheat. (Always the wrong thing). I forced the bend and it popped off the taper of the anvil and I saw it coming, through my head back and it got me. The pictures look different because I had to shave that night to get the smell of burned hair off my face. It sucked shaving.