Jump to content
I Forge Iron

GoodThing Factory

  • Content Count

  • Joined

  • Last visited

About GoodThing Factory

  • Rank
    Advanced Member

Contact Methods

  • Website URL

Profile Information

  • Gender
  • Location
    westchester county, ny

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I was reading another forum and someone claimed they've used Acetylene for their forge. My understanding of the post was this guy wasn't talking about using a cutting torch to heat steel but building a forge that used Acetylene rather than propane. I've never seen plans for such a thing and on it's face it seems less than safe and expensive since you'd need a huge or manifolded tanks for anything other than a tiny forge. Just curious if anyone has run across this design.
  2. interesting ... it def looks like the screw box was replaced or repaired and brazed onto the interior threads. the box itself is in pretty rough shape - could be age or maybe not the best job to begin with but it's solid and functioning fine. from the way it fits into the shank it seems like there should be a flange on the box to prevent it from slipping in the hole when the screw rotates - maybe there was a shim / wedge which is long gone. you're spot on about the repairs ... having taken it completely apart you can see it's been fixed quite a bit. but with exception of the tenon on th
  3. yup, that's my plan. the tenon and wedge doesn't seem as sturdy. thanks
  4. thanks guys ... just curious if anyone happened to know the make. mine is ready for a rebuild ... the tenon snapped on me and when i took apart i found some pretty half baked welds where it's been repaired at least once. i'm thinking the way to go is forge a new mounting bracket assembly and collar from some wrought iron i've got
  5. find the circumference of one coil (pi x diameter) and then multiply by the number of coils + leftover to get the length of the whole spring. the diameter of the stock should be constant
  6. amen to that! after wrestling with several springs to straighten out 8 - 10ft length now i just a cut a curl or two and straighten that. much easier and safer
  7. thanks .. yea, thats it. couldn't find another image of one like it. any idea who the mfg is?
  8. Wondering if anyone can tell me whether the way the mounting plate on this vise is original or the product of repair who knows how long ago? i've looked at a ton of images and can't seem to find another example of the mounting plate being secured to the shank via a wedge and hole in the shank and spring. Also, curious if anyone knows manufacturer and approx date. Thanks
  9. really appreciate the the advice and input from all of you - thanks!
  10. I'm not 100% sure what you're asking since I haven't ground in a bevel yet but to create the downward curve i forged the top wth a rounding hammer and the used the horn to shape the point. also, worth noting - prob obvious - i did some grinding as well.
  11. thanks .. i took a look and yea what i'm making is definitely looks like a pruner - not something i'll get much use form - even thought i like the shape it's prob time to rework it back into more of a tradition hunting knife Frosty to the rescue! That's where I've seen this shaped blade before. Not what I was going for but thats what I've got.
  12. I've started what I was planning on being a hunting knife but the shape I've got doesn't look much like any hunting knives I've seen. In fact, I haven't seen any images online of knives with this shape with - point curved downward. My question ... am I just making an upside down knife or does this blade fit into a "category"? Thanks in advance.
  13. welcome ... no offense but "way easier than it looks"? not exactly. if you've been watching YouTube videos of guys with decades of experience who move metal as if it were clay then you've got a surprise coming your way. they make it look "easy" but to get the metal to move the way you envision takes quite a bit of effort and practice that said, it's not all that hard to get started ... a barebones smith set up is pretty easy to create if you you want to get a feel for whats involved. a piece of rail track, a hammer, some vice grips and home made forge and you're ready to go. wa
  14. without some kind of coating mild steel is going to rust - no way around it. beeswax, linseed oil, getting to orange heat and cooling in oil are all common ways to prevent rusting. however, if you're going make items that touch food you'll want to leave it uncoated and then rinse and give a wipe down with cooking oil after using.
  15. according to smith ... http://www.smithequipment.com/files/pdf/resources/FAQ_GasRegulation.pdf
  • Create New...