Ron Hicks

sounds just like mine

I did the same thing - got to have a bigger pipe. I used the 6 in stove pipe but I used 2 to make 1 large pipe. I took them apart at the seams and attached them together at the seems. They will lock together I made a collar that fit the pipe and welded it to the top of my sidedraft hood . It works really good Need a straight run of pipe above the ridge of roof

Isnt blue the cleanest flame?

I just bought a Dyna - Glo portable keroseen heater and wondering about the flame color Ive run my first full tank of keroseen through it and dry buring the wick now. I think I should need a blue flame the best I could adjust it was about 1/2 of flame blue with yellow tips . If I lowered it any lower it would turn orange. The manual says to keep it at 1/2 in flame hight at top of of burner. If I crank it down to the 1/2 in. its a dirty orange - to get into the blue flame I would say the flame is closer to 1 inch hight. Im using new, clean, no water - K1 keroseen Any Ideas? Thanks Ron

Did that Normalized after forging and anealed in the coal fire I got more file work to do So a spring temper Thanks Nice lookin hachet

I think I have it now What kind of steel could it be S7? It was a Vaughan ballpeen. I had anealed it last night and able to file on it but slow goin. I got greedy and tried my angle grinder on the bottom of the spike. Im glad thats the only spot I ground on . Think I can get it with a new file. How should I harden and temper this thing?? I made a few knives from springs and races. Thanks Ron

What do you think - kinda odd lookin I may flatten out the spike or cut it off I think I can work the eye with files and square the handle to the head

Thanks I forged one today from a 24oz and use my homemade drift. My drift I left one side straight and tappered the others. It worked but makes the eye angle off from the blade- I think I finally straightened it will know after it slow cools. That was enough of that I ordered a ductil iron drift. You have a pic. of the drift that you use? Should I drift the eye first ?? Thanks

So get the drift in the eye and draw it on the anvil? Great Hawks

I was thinking about making the eye bigger in the ballpeen - wanting a bigger stronger handle. I have some big punches I could drive through or should I use a punch that fits and draw the sides??? Thanks Ron

I want to make a Tomahawk from a ballpeen and wondering how I should work it at the forge? Also whats a good size for the eye - thinking about 16 oz. or 24 oz. ballpeen Im not worth a flip at forge welding Thanks Ron

Ive messed with some grader blade - I made cold cut chisels -hot chisels - punches from it . They seem to work ok ,All I had at the time Ive heard it was wear plate

Sam Long time - the forge looks Great I bet you will love it. Good Job Ron

Also came across another thing I had not seen. They cut a hole in the bottom of a bucket hung up by the handle and grew tomatoes upside down. No staking Never seen such Upside down Tomatoes I think I may try this Garden Pest Control Ron

This is for sure "Non-Metalworking" I want to have a garden and where I live now is nothing but rock with grass on top. I was looking on the net for ideas and came across a thing called an Earthbox. EarthBox - Homegrown Vegetables Without A Garden I didnt see spending all that money and found this http://hometown.aol.com/jmalt31/myhomepage/Earthbox.PDF Easy way to go- just keep water in it. Looked good thought I would pass it on Ron:D

Jerry I save a pic. of your Power Hammer on my puter and lighten it up a bit Hope it was OK Now there is 2 pictures of your Hammer in the Gallery Ron

Hopes its ok Jerry I found your hammer

Dics Brake Rotors- would make a good base for a stock stand Brake Drum - Fire Pot Axel Shafts- Punches,Chisles,Hardy Tools Drive Shaft- tube for your brake drum fire pot, Muffel for HT

Peyton That is a good lookin Anvil Thats seems to be a very good price for the anvil. Vaughan Brooks 100 # is like $500 + new Thanks for the link Ron

I just want to thank everyone for putting up with me and all my ? For the past 25 years I have never been out of work more than 2-3 days but I took what ever I could find. For the past 6 months I have been out of work. I was just about to give up I could not even find a dead end construction job. About the only thing that has kepted me from goin nuts was I Forge. But - I got a phone call at noon today and I start work Monday For the City Water Department Benefits - Only 5 mins. Away Hey I Got A Job Needless To Say Im About To Bust A Gut I am soooooooooooooooo Happy Ron

Looks good Mark Jerry sounds like you made a nice hammer also Ron

Just something I found some might like it The Rivet and Power Riveters. The American Blacksmith. Blacksmith Arts. Blacksmith.

Thanks Guys Ill make a punch to make them. Im riveting tongs that Im working on , I think these will be my first good ones. The others were made out of to lite weight of stock. I made the bits from 3/4 sq. & forged welded on the reins- Flat bit tongs. My next tongs will be Chain Tongs hope they turn out - my last try looked good but not heavy enough. Thanks for all the help Ron

Don One of these days I plan on going to see the Blue Ridge Parkway and Ill for sure stop and see Fort Loudoun. I bet its hard only going once a month to the Smithy. Thanks Ron