-
Posts
159 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Everything posted by Thief_Of_Navarre
-
Large Saw Makers or Sawyers Anvil
Thief_Of_Navarre replied to JT's topic in Anvils, Swage Blocks, and Mandrels
That would be an excellent price here in the UK but I'm sure it's not quite that linear. -
I believe the Birmingham pattern was intended for heavy shoeing and agricultural use thus no need for a step. There is also a Portsmouth pattern which has a squared off bick the other side to the conical horn much like a French anvil. I have no idea about the use for the Portsmouth pattern; shipping/rigging uses maybe?
-
Yeah well the fact that they sell and you never need buy a birthday/Christmas present again is a minor point compared to the satisfaction of making them right.... :s
-
Here's a New one "southern anvil"
Thief_Of_Navarre replied to Mark Ling's topic in Anvils, Swage Blocks, and Mandrels
I've actually never heard of one. Must be an american Thang! -
Here's a New one "southern anvil"
Thief_Of_Navarre replied to Mark Ling's topic in Anvils, Swage Blocks, and Mandrels
There's a workable bit by the heel. More than enough space for someone with your talents! But I concur, a lot of money for a poorly anvil. -
I like pretties that double as practical trinkets. Keyring bottle openers, sporks, green woodworking's tools e.t.c.
-
Large Saw Makers or Sawyers Anvil
Thief_Of_Navarre replied to JT's topic in Anvils, Swage Blocks, and Mandrels
Thought it looked like a fisher Good score! -
Anvil face condition question
Thief_Of_Navarre replied to JSlayer's topic in Repairing and Modification to Anvils
Go and see it ASAP, do the rebound test. Depending on it the size a decent PW should have 80%+ . It might have just seen alot of bad treatment but be otherwise okay.- 2 replies
-
- anvil
- peter wright
-
(and 2 more)
Tagged with:
-
Large Saw Makers or Sawyers Anvil
Thief_Of_Navarre replied to JT's topic in Anvils, Swage Blocks, and Mandrels
Looks a lot like a fisher. Never seen one unmarked though so I wouldn't put money on it brooks/baker/Vaughn also made this pattern and many were unmarked. -
Mute the ringing
Thief_Of_Navarre replied to The Alchemist's topic in Anvils, Swage Blocks, and Mandrels
That's interesting, might have to play later. -
Possibly A Vulcan ?
Thief_Of_Navarre replied to SReynolds's topic in Anvils, Swage Blocks, and Mandrels
Small Vulcan anvils do tend to look like this. I'm not sure why they look so obvious when they are smaller, it might be that they use the same thickness on the tiddlers as they do on full size forging anvils. From what I remember they are cast iron bases rather than wrought so they tend to be very quiet; easily mistaken for ASOs. The one I own had been damaged in a fire so for all intents It's an anchor. -
Possibly A Vulcan ?
Thief_Of_Navarre replied to SReynolds's topic in Anvils, Swage Blocks, and Mandrels
I think I'm a bit out of touch then when it comes to retail prices SReynolds Rboughton3rd, if you know any (fairly) local warehouses or builders merchants it's always worth asking if they have any spare steel from reach or counterbalance trucks. My day job is in a warehouse and they literally throw out high-reach truck wheels when the rubber is spent; they make great forges or cut into pieces they make jig sets for punching or bending. The fork time is harder to come by as its usually sent off for repair, but it makes for a cracking starter anvil -
Possibly A Vulcan ?
Thief_Of_Navarre replied to SReynolds's topic in Anvils, Swage Blocks, and Mandrels
A hadfield & Sanderson if I'm not mistaken (I was born half a mile up the road from that!). A shame! -
Very nice, I like the simple black scales. Good job, I'd happily trade my dovo in for that
-
Colonial anvil ID/age help
Thief_Of_Navarre replied to CoyoteGear's topic in Anvils, Swage Blocks, and Mandrels
Cool video, I can see why you would want one now -
Mute the ringing
Thief_Of_Navarre replied to The Alchemist's topic in Anvils, Swage Blocks, and Mandrels
Having read literature from Stonehenge and Avebury (I'm a local) I doubt very much their current erection is anything like what it was when it was supposed to have been raised. They dug most of it out of the turf in the Victorian period. -
Mute the ringing
Thief_Of_Navarre replied to The Alchemist's topic in Anvils, Swage Blocks, and Mandrels
Wish I could get my brooks that quiet. Perhaps I need rubber aswel as the steel base, magnets & chain lol. -
I payed £1.50 a Pound for it which was perhaps a little steep but I'm content. The guy who I got it from goes over to France with his brother and picks interesting oddments while he is there to bring back. He knew a lot about the sedan / donchery region that it's from but little about the anvil. French wikipedia tells me little other than when they started manufacture. I just can't resist shiny pretties! As for training with anvils you probably wouldn't want all extra load on your seisamoid bones, or if you are going for it you need one back and front to balance you out...
-
-
Good plan. Remember to document your work, we love pictures!
-
Peter Wright 126
Thief_Of_Navarre replied to SYFL Coach's topic in Anvils, Swage Blocks, and Mandrels
I have a 1CWT PW. A fine anvil with only a tiny flat spot right near the middle (grrrr). Yours looks in great condition! -
Newbie with mystery anvil
Thief_Of_Navarre replied to jAnderson's topic in Anvils, Swage Blocks, and Mandrels
Looks like a Sheffield London pattern (probably late worker from mousehole as JHCC suggested.) The divot in the base is an odd one though.. I've seen a Sanderson like this but I suspected at the time it had been cut to mount on something. -
Beginner with questions and pictures
Thief_Of_Navarre replied to beard's topic in Anvils, Swage Blocks, and Mandrels
Like has probably been said already (there is alot of good opinions here). For an anvil; it only has to be harder than the stuff your working and the hammer your hitting it with; Railtrack is perfect since it generally work hardens. Forklift tine is another good thing to have about (luckily I work in a warehouse so it's plentiful). Hammers look fine and the brake drum is fine imo; you can draw enough air through a bunch of bricks to make a forge. -
Hard to tell brand without better images but I concur with everyone else that it does look like a PW by the feet. If it's anything like mine the rest of it still has some promise; Like someone said before ask less for it. For reference I paid £150 for my 141lb c1918 PW in 'almost' perfect condition bar a very small flat spot where the previous smith has overused a point with hot stock and ruined the temper. I don't know how US anvil prices compare really, I imagine you pay more for them despite more of them being available in the states.