templehound

Thats what I thought. so the answer is definitely not" Yes" ....that aint a smooth transition...pretty coarse wedge

Ridiculous 20, secondary 40....I am not certain what do you like to say/ask.... Mostly I grind blades down to a thickness of 0,20-0,30 mm so that they flex on my bare thumbnail. A blade that is ground so thin and sharpened with a primary bevel of 20 Degree , is not ridiculous at all. Well, that cuts like poison! Those 0,20-30mm can be easily stropped down to zero....rolled edge is the term, I guess. That is the old school and best edge You can get on a knife blade. Based on that, the "meat" behind the edge determines how strong Your edge will be.... So the secondary40 means the blade flanks?......please enlighten me Cheers

Thanks for the fine comments, Gentlemen!

Simple drop point hunting tool with 2442-blade, copper bolsters and Ceylon ironwood. Sheath made from water buffalo and high carbon spring steel clip. Cheers

Somehow I missed that one.....IMHO slip joints are more fun to make then using them. ...and they come not easy off the bench. This one looks great!

Frosty, Pnut, thanks for your comments! They are appreciated a lot!

Here are three of my recent folders I made the last months. As they come in unetched Wirtz-Damascus with Padouk, O1 with Ceylon ironwood and etched Wirtz-Damascus with Indian almond tree. Liners are springy hard titanium 6Al4V, locking springs are high tempered1095 and the screws are hardened low carbon steel. Cheers

Increase the carbon content of 1095 high carbon steel? it has already 1% Carbon!.. Steve said it already, Why?.......for what?......whats the point in this? I just dont get it.....thats not crazy, please forgive me with all due respect...thats very close to silly.....but I will not offend You, dont get me wrong here. It is contra productive.....it will go at least 0,10mm deep from both sides of the blade. Youre edge and tip will pop off due the lack of toughness, it turnes out super-brittle....and you can temper as you want....it wont change anything. Dont waste your time and money, dont ruin good American high carbon steel! do and try something more reasonable instead.....but like I said, no offence.

Hi there my friend. first ....who would blame You for the amount of pictures? The more the better! for us looking at your skilled work is entertainment and we are not overfloated with that, arent we? To make a living with making knives(or another craft) needs a lot of discipline....I say, more than if You work for somebody from 8am-4am....it more easy to get distracted by some " knife playing in the backyard" ....of course said from my point of view. as ever you show a nice asian influenced row of wild useful tools all looking undestructable and pretty mean And....he year isnt all over yet....keep them coming! Cheers

Yes, I have a website but it is way too old,....no update since years. http://messerboll.net/ I am working on a new website but it really takes time. best place to look at my work is in our German forum https://www.bladecommunity.de/index.php/Board/169-Daniel-Boll-messerboll/?s=17b8052193aff540cdd8f842863f4e71a30e2ada Cheers Thanks a lot, Chris!....much appreciated!

Thank You, DHarris! Yes, I do my own leatherwork. Well, actually it is wrought iron. Cheers

Thank You, Daswulf

Thanks a lot, Guys!

...I made the blade of Damascus from A.Wirtz(Germany), iron bolsters and sterling pinned Rams horn. Blade length measures 97 mm and 215 mm overall length. Cheers

Is it flat tang of hidden Tang?....on the picture it could be both even if there no pins shown, it could be both sometimes the questions are so simple that I have a problem to understand them.... Cant You find a a piece of crap mild steel?...just something like 100x40x6-8 mm?....or bigger or smaller?.... just by a piece of construction mild steel at your local dealer....maybe cost 2$?.....? ....and by the way....if you are a beginner in knife making, try to keep it simple!!! .....front bolster is enough for the first round. good luck

..... there we have it.... a rail road spike and a wrench having a lovechild.

Oh my God!....Wrenches, rail road spikes.....rail road spikes and wrenches.... they come with low carbon and while forging this low carbon is even less... ....and yes burning them off is hazardous to man and air polluting.... Apologies, but...after millions of educating posts they are still a pest in the knife world.

Thanks Awrksmokey!

rhitee93 and Daswulf, thank you fellas rhitee93: ....actually the layout for the stencil on paper took more time than the work with the jewelers saw

Thanks, Guys.

....textured like sun. So it is O7, copper, sterling silver and Sambar stag. The The riveted tang is picked up between the antler tips of the stylistic deer head on the butt. Cheers

SLAG - Thank You very much for the fine comment, Sir! One handle is steller bone and the other is water buffalo horn. Cheers

Les L, gmbobnick, FatFrumos, thanks a lot for the nice comments.....they are much appreciated! FatFrumos, generally I use everything that reacts on copper....best results I get with liver of sulfur. I spread it on the copper and let it stay there without cleaning it off....so it can react on and build a thicker layer of oxidation. here in the tropics it is very easy to age copper....the high humidity helps a lot to get a patina faster.

Well, that learning curve never keeps straight, always upwards but never straight..... So here I am again with two of them ....they made me sweat and think like they always like to do. No knife design will come to my mind, that looks more like a tool than a Finnish puukko with a barrel shaped handle. While the rudimentary basics of the blade form is in shape and size comparably easy to make, ....but the effort of eye balling in that handle form is enormous...at least to me. If I forget a moment to stay true to the crosshairs, I can easily loose my touch to the form. And after all, a traditional back stiched sheath can make me find myself or loose myself.... ...and that kind of knife sheath is still definitely a different science for itself..... ...as they come in Tungsteen tool steel, copper, bone and horn. the blades have ridged backs and riged ricasso choils With true ferrules and the tangs riveted over their butts. cheers

Bryson, DASwulf, Thanks Guys!