Jump to content
I Forge Iron

Valentin

Members
  • Posts

    591
  • Joined

  • Last visited

Everything posted by Valentin

  1. Nice to hear that ! Congrats !!! sweet :)
  2. To more new toys just arrived 3.15Tone hydraulik press and a smooth grinder
  3. Well i haven;t seen many arround and i started building one ...mine it;s allready finished now the only thing lacking is the electric motor .I'll post the picture ...and let me see your's
  4. This folowed me home .... for 120 USD iT has a variable speed starting from 3.2 rpm until 32 rpm .At 32rpm it has 46Nm of torque ...and i hope that at 3.2 arround 400
  5. Very beautifful anvil if u ask me but have no ideea about performance
  6. I have heard that some people put a peace of coal in the forge to burn the exces air...The choke is simple to make...you just make a hole in the pipe weld a nut and than insert a screw in there. BTW i was never able to forge weld in my gas forge...but i only tried a coule of times.
  7. The hammer looks good but ...seems to have no life in it i think i tire hammer is faster and can deliver harder/faster strokes.Looks good though but i would not start building it
  8. 600 USD for this pile ...quite a nice find don;t u think so ? The spot welder looks like it took a beat but except the bendet frame i hope it works ok The reductor is 40/1 The punch press is 10 Tone The grinder on the post has 1850RPM And a bench drill ... to bad that the only way you can adjust speeds is by changing it's fuleeys
  9. Nice shiny looking tools !Good JOB !
  10. you can also look here http://www.iforgeiron.com/forum/f57/i-need-help-again-air-power-hammer-1847/
  11. Hmm... Oil coming down from the piston is ok ... mine is always leaking... No oil in the glass pipe ...is not good you have to make sure that oil is going to the pistons... If the piston rings are worn out ...the hammer head is not retracting up after you hit (from the foot pedal) ...the ram is suposed to move fast ..up and down
×
×
  • Create New...