Reeltree

Members
  • Content Count

    305
  • Joined

  • Last visited

About Reeltree

  • Rank
    Junior Member

Profile Information

  • Gender
    Not Telling
  • Location
    Nelson Co. Va.
  • Interests
    Heat & Beat

Converted

  • Location
    Foot Hills of the Blue Ridge Mountains of Virginia

Recent Profile Visitors

3,762 profile views
  1. foot step on a carriage perhaps
  2. Also don't get caught up in worrying about any lower duty cycles. You more than likely will just be tacking in place, stop look adjust run a bead or two stop look adjust so forth and the like.
  3. I live in a two story old farm house. It is 8pm and 92 degrees upstairs with windows open and all ceiling fans swirling. I've been hibernating in the bedroom with an A/C window unit at full blast. Now its cooler outside than indoors during these late evening hours. But over all these years I have learned to adjust to these conditions with the trade off being able to enjoy the wildlife and surroundings.
  4. Stay away from the low end off brand wire feed mig welders. In days of old I used a battery charger and coat hanger in a pinch for light repairs
  5. drift weights' to slow your vessel down while fishing the river
  6. I like your excavator's toys. Instead of changing out buckets on the track hoe he just keeps a different size bucket on different track hoes.
  7. Das, you were just thinking ahead when she gets older and you can use it to pull motors.
  8. Picked up a couple of die and holders last night at the auction house. They had been laying in dirt and crud for who knows how long. A little go juice and a wire wheel and they seem to be in good condition. One is a Champion Blower and Forge.
  9. A good power washing to knock down the dirt and dust, then put a fan to blow through the window/ cut out an opening to the outside same concept as when spray painting , to blow the over spray out. A one time washing will not hurt the wood beams.
  10. Can you post the size of the biggest square cutout in the center for me , thx
  11. If they are fairly new, they are junk, have had cows rub up against them and they snap in two. Have pulled out old old ones from the mountains that where made of good steel and are stuff as nails.
  12. I use to have to turn in the old cv joints for the core charge. Don't miss having to change those out.
  13. Alexandr,,Im always at aw with your creations, I am curious if the chard beams have a noticeable smoky aroma in the room area
  14. Reeltree

    Tongs

    yes bunion stretcher