Jump to content
I Forge Iron

DKForge

Members
  • Posts

    272
  • Joined

  • Last visited

Posts posted by DKForge

  1. Kyle very nice. I do a lot of rivet work in my pieces and think it adds a great touch that many people are not used to seeing when welds are more common. Not a criticism but the first cross feels like it is missing something. To me, I see the legs, body and arms of Christ on the cross but I wish I saw a small forged neck and head. It doesn't have to be detailed just a representation since without it I see a headless Christ.

     

    Keep up the good work.

  2. Yeah I saw that they were flame cut...but again no telling how long ago since oxy acetylene goes way back. As the industrial revolution progressed and the blacksmith began to disappear I could see a catolg offering these pre-cut blanks to the remaining smiths or those who bought blacksmith kits from Sears for use around the farm as an alternative much like horse shoes went from hand made to keg blanks.

  3. So to clarify, lets say a custom home builder comes to me because their client wants a set of hand forged fireplace doors, a hanging pot rack, and a hand rail in their theater room. I am fine doing all the homework needed for the project and creation of the items. Installation though must be performed by the builder or a licensed contractor since I do not have that license.

     

    Along those lines how many don't have their contractor's license and rely on others to do their installs?

    Arftist -  it sounds like that is common in your area since you say you do installs for other artists.

     

    FYI - the reason I am asking is because I have custom builder in the area who may be sending some work my way based on some client requests.

  4. If I could offer a piece of advice for new smiths it would be to keep a journal or some sort of record of what you make. When you make a piece, record the stock size used, length of pieces cut, measurements for placement of pieces and holes drilled, drill bits used, rivet size, finish applied, what you charged for it etc. Then take a picture of it.

     

    I just made a wall mounted coat rack for a client who is giving it as a wedding present. The day after I delivered it I got a text that my client likes it so much she wants two more just like it. If I had kept all the info above it would be very easy to refer to my notes and knock another two out. Since I didn't I am starting from scratch. Luckily I have the original drawing I created for the piece. If I had more detail it would make it even easier.

     

    I have heard many times in the past that another good suggestion is if you are making one, go ahead and make a second at the same time. I agree it makes sense but have never gotten in the habit of doing that either.

    After this I will be keeping a journal in the shop just for the purpose of keeping better notes when working on custom projects like this.

     

     

    coat%20rack_1.jpg

  5. So we all agree that nothing looks worse than a hand forged art piece, whether it is a hook, coat rack, grill, door knocker, or whatever that is then hung with a philips head screw or a galvanized nail because that is all the purchaser had available.

     

    I have bought some of the Blacksmith Bolt Pyramid Head and Square Head Lag Screws  for specific hardware projects and they are great and have given the projects a finished look. The problem with them is they require an 8 point socket. Your average client who might buy your artwork at an art/craft fair, retail location etc. doesn't have an 8 point socket so even if I provide those lags they have no way of using them.

     

    What are others doing in this matter?

    Are you providing your clients with anything to hang the items they buy from you?

    If so what are they and where do you get them?

     

    I'd just like to see what others are doing.

    Thanks

    DK

×
×
  • Create New...