Its about 320mm x 40mm mild steel cutout from a hole in a plate.
The holes I drilled in are in the pattern inspired by http://www.iforgeiron.com/user/26-yesteryearforge/ I made it so that each hole is 3mm further away from the center. Using hardened steel pins and different sized discs or jigs you can bend radii, circles or scrolls.
I added a hardy hole for existing tools like a cone.
After mounting it on a stand I welded holders for hammers, discs and a small tray that rotates under the table if not used.
bender2
in Tools
3Posted
Its about 320mm x 40mm mild steel cutout from a hole in a plate.
The holes I drilled in are in the pattern inspired by http://www.iforgeiron.com/user/26-yesteryearforge/ I made it so that each hole is 3mm further away from the center. Using hardened steel pins and different sized discs or jigs you can bend radii, circles or scrolls.
I added a hardy hole for existing tools like a cone.
After mounting it on a stand I welded holders for hammers, discs and a small tray that rotates under the table if not used.