Jump to content
I Forge Iron

ausfire

Members
  • Posts

    3,535
  • Joined

  • Last visited

Posts posted by ausfire

  1. Thank you all for sharing your experiences and writing comments here. I will be starting the forge again on Sunday after about 6 weeks away from doing the daily demos. I'll start with three days a week plus Sunday and just do an hour or so each day. Don't want to overdo it, and I'll stick to small S twist hooks, troll crosses and such for the moment. Tourists really don't care what you do so long as they see hot steel being moved.

    And I shall be sure to have that bottle of water near the forge at all times. I learnt my lesson!

    Cheers everyone.

  2. I'm not sure if this is the appropriate place for this post, but just felt that I would like to make this comment in the interests of personal safety and general health. Admin please delete if this infringes the guidelines.

    I may be preaching to the converted here, but I think people who work in an environment such as ours, especially in hot weather need to be acutely aware of the need for good hydration. If you are working over a hot forge in hot weather and you have not had a drink all day, you are not doing your body any favours.

    I have been away from this forum for quite some time due to poor health, and it's not until recently that it was brought home to me how I have been neglecting my body for years simply because of lack of water. Even if you don't feel thirsty, it is important to keep your fluid levels up. If you don't look after yourself in this way, especially as you grow older, it will catch up with you in the end.

    Like many us, (well, blokes anyway), we may suffer from enlarged prostate as we grow older and that condition can impact severely on your ability to expel fluids. I required a very fast trip to ER because of urinary retention which is a very serious, frightening and extremely painful experience. It can be life threatening if you don't get to hospital fast. The paramedics were very good and gave me pain killers for the 20 minute rush to hospital where a catheter was immediately inserted.

    My point is this: be aware of the need to hydrate, even in cooler weather and do not neglect the symptoms of enlarged prostate. Better to get something done about it before you are forced into an emergency situation. I was fortunate to be referred  to a urology surgeon fairly quickly and underwent the necessary operation - Trans Urethral Resection of Prostate (TURP) and I have been recovering quite well. No hammering steel for a few weeks yet though.

    So guys, NEVER EVER underestimate the value of a good pee, because if it stops altogether, you need to get help without delay! 

     

  3. On 5/14/2021 at 1:44 AM, Michael said:

    I posted this back in 2015 on another RR spike thread 245.04 kB · 0 downloads

    With proper credit to the Kootenay Blacksmiths Association.  I keep a print of this out in the smithy for inspiration

    KootenayRailroadSpikeContes.thumb.jpg.e8f162a0b6d47f2174d678bae84b2361.jpg

    I too have kept this photo for inspiration for a couple of reasons. One is that I have an unlimited number of rail spikes to work with, and the other is that it reminds me of our visit some years ago to Kootenay Forge in Canada. They were great people there and invited me into the workshop to watch the power hammer in operation and see their tumbler techniques for polishing finished pieces. Bought a couple of pieces to bring home to Australia.

    I have forged a few of the items in this photo but many I would like to try. The dragonfly is impressive and I like the toast fork with the knot.

    Haven't been on the forum for a while as I have not been well, but hope to get back into forging soon. Photos like this make me hope for a fast recovery. 

  4. On 12/1/2020 at 11:27 PM, Daswulf said:

    Those are some nice evenly twisted handles Aus! 

    Thanks, Das. Haven't been putting up much on this site lately. Seems I just do a lot of the same thing - mainly tourist stuff like bull head bottle openers, billy lifters, ram heads, troll crosses, fire pokers and the like. Still doing demos every day at the Village, but it's getting very hot here now. I guess you are preparing for some cold. Have been trying some different twists on the billy lifters. Here's one with a  stairway twist. 

    Anyway, Cheers from Australia and hope all is well with you and family.

    stairway long.JPG

  5. Just finished a fire set. The base is something off an old machine I found in the scrap. It’s patented Feb 2 1897 so there’s some history there. I wound a vine around the stem to add to the historic look. Four tools - poker, shovel, brush and toast fork, all 8mm round bar mild. Put the big bearing ball up top for a bit of bling!

    Putting this on from my phone. Never done it before. Hope it works OK.

    79654BB8-7022-4FC9-B7C6-E59BDABB368F.jpeg

    ABD2E5DC-FEBB-4037-B231-BEBA603B52F9.jpeg

    93747765-30B6-4197-BD57-A5A9E66D3B32.jpeg

    B79F7093-5442-46A3-80DF-EC2A70CD55C5.jpeg

    ED31FD6A-D527-456E-B702-3B26B824DAC8.jpeg

    3C77B638-C7CB-49A4-9DAE-692C40DE1F8C.jpeg

    983FA807-290F-4840-AD4A-E9A016DE49D5.jpeg

    531A46FD-F68A-4BEA-9436-857F86168700.jpeg

    395B15E7-8FE9-46BA-A55D-6B92D2839492.jpeg

    3644E5B3-6D6E-437A-A310-10A05DB0FF57.jpeg

  6. Finished off a fire set today. The stand has a heavy base from the scrap pile, a long wrought iron bolt attached and a forged four-hook assembly on top. I added the bearing ball as a bit of bling. The four tools are poker, rake, shovel and fork. It's the first fork I have made with four prongs. Reason is that the guy who's getting this has four kids and they all want a toasted marshmallow at the same time! Stock was recycled 10mm rebar.

    DSC_2384.JPG

    DSC_2387.JPG

  7. MacLeod, I'm not the right person to ask about tips for drawing out wrought iron. I can show you how to make nice toothbrushes out of it! I know you have to get it very hot to work it successfully and I have had mixed success with it. I do have a lot of it and I should learn to be more patient. It does have a very nice lustre when brushed up.

     

  8. I admire the work of those old-time smiths. I wish more of them would have used a touchmark to identify their work. I have been dragging out a few old hooks from my scrap pile and, on cleaning them up, discovered that T.P. Jones of Dudley, England, must have been a very prolific hook maker. Research reveals that he was also an anvil maker (anyone got a Dudley anvil??) and anchor & chain maker. I like the way he has stamped BEST and GENUINE on his work. I also like his touchmark of the bullock. Most of the hooks I have came from old bullock drays and wool wagons. And the number 28 occurs on a lot of them. I checked - exactly 28 ounces. So hooks were bought by the weight. I  like the way he left plenty of metal over the eye too. He made things to last. What a legend! Here are a few pics:

    DSC_2349 (2).JPG

    DSC_2345 (2).JPG

    DSC_2348 (2).JPG

    DSC_2344.JPG

  9. I was told that I should not have used bright steel Philips head screws. Probably right, but I wanted to get it finished and they wee readily available. I have replaced them with flat head carriage bolts now and it is definitely better. Thank you all for the positive comments.

     

    DSC_2208.JPG

  10. My son has just installed a great fire 'pit'. It is a huge stainless steel pump housing, which required a crane to lift it. . A blower stuck down the outlet flange creates a vortex of flame that is spectacular.

    Anyway, I believe that a fire pit that good deserved a matching fire set, so I found another pump housing in the scrap and used it for the base of a four piece fire set … poker. rake, toast fork, shovel. He doesn't like fancy stuff much, so it's just industrial looking twisted rebar.

    DSC_2244.JPG

    DSC_2245.JPG

  11. Nice when your son works in the heavy metal industry and brings home goodies like these bearing balls. The large ones are 40mm in diameter. A quick estimation (4x pi x 2x2x2 and divide by 3) would make a volume of about 34 cubic centimetres. That's enough high carbon steel to make a good long knife! And lots of scrap art possibilities:

    balls.JPG

  12. Rebuilt the forge face. The last tuyere had melted so far back into the wall it was hard to heat long stock. Put in a new buggy axle hub so the tuyere is now flush with the firewall. Also added a sliding rod that makes it easier to rest steel into the hot spot. Better than balancing it on hammer handles as I usually do. Looks a bit untidy but I think it will work well.

    DSC_2221.JPG

  13. I have only just come across this thread, Thomas, and am so saddened by what I have read. I can only imagine the pain you are experiencing right now, and I send prayers and good wishes to you and your family at this difficult time.

     

×
×
  • Create New...