Jump to content
I Forge Iron

Declan Kenny

Members
  • Posts

    39
  • Joined

  • Last visited

Converted

  • Location
    Ireland
  • Biography
    I'm a novice blacksmith
  • Interests
    Crafts, history
  • Occupation
    Graphic Design and firefighter
  1. That lathe looks nice and solid. Did you ever make bowls on it?
  2. That's great stuff (particularly the bit where the forum swings into action when I'm hitting the hay!). I am not at the forge welding stage yet, but I hope to progress to that. Mind you, with the amount of good quality scrap available, there's no need. I am using a pole lathe for demos, but in the workshop, I don't have the room, so I use bungee cord and a thin leather strap. Great for turning bowls. Haven't tried forging on site yet, for the public - that's a private matter for now, 'til I get half decent at it. I'd love to see some pics of your lathe. Cheers again. Dec
  3. Hi, I'm one of those 'traditional' turners! I try and do things from the early mediaeval period of European history, or Viking Age, as it's sometimes called in Ireland. To that end, I made my own lathe for bowl-turning, and try and forge my own tools. The traditional hook tools were all made from one piece of iron with long wooden handles. It's tempting to go the carbide route, but then I'm trying to cut timber, not corners... Thanks for the reply though; it would certainly save time.
  4. Nope - no power hammer here I'm afraid, but on the plus side, hook tools don't require much work on the forge; it's getting an edge and keeping it that requires the time! Cheers, Dec
  5. Thanks for the replies. The torsion bar I picked up today is solid, and looks to be good quality. I'll have a crack at a few tools over the next week or so and post some pics.
  6. Hi, I've no doubt this topic has come up before, but I am going to get my hands on some torsion bar to try and forge some wood turning hook tools. The steel will come out of a breakers yard from old cars; I'm hoping to get it at around 16 - 18mm in diameter. The main issue is, I guess, that I will have no idea what the composition of the steel is. Is it safe to assume it should have a reasonable carbon content of around 0.5% and more? And what typically would the other small percentages be made up of? Chrome, nickel? I've no idea, but I suspect they all vary hugely. Are there any issues in terms of forging heat, annealing and tempering? Or just treat it as ordinary carbon steel and see what happens? Thanks in advance.
  7. Blade from piece of old file, not highly polished, handle of reindeer antler, birch bark, leather and curly birch
  8. The first two hooks are ready for grinding an edge in the morning.
  9. Thanks again for all the advice. I can get my hands on coil spring no problem. Made a couple of hooks today, one from an old chisel, and one from a large round file; I'll see how well they hold an edge tomorrow when I grind, temper and sharpen. Cheers, Declan
  10. No, not off topic at all. There's no reason why small amounts of really good steel could not be welded onto mild bar for the shafts - after all, these hook tools are quite long, and it would eat up lots of good steel, most of which would never be used for cutting. Having said that, I would need to bow to greater knowledge for such welding skills, and fortunately, my mechanic friend next door is just the man! But for historical accuracy, I would be grinding this weld down to 'hide' it. And the changeable tips wouldn't be a runner at all. But then most of the timber to be turned on a pole lathe is relatively green, so carbide should not be necessary.
  11. I agree it's really an anvil, but 'moulding block' seems to fit in better with the Triad. It's definitely my favourite. The other one I like is: triad 238: Tr
  12. Yes, thralls are hard to come by! But if you Google Robin Wood Battle of the Bowl Turners (or on YouTube) you can see that the pole lathe is really rather nifty. Thanks for all the feedback. I've just tested a few bits of steel in the workshop and I definitely have some prospects there for a hook tool or two. If I have any luck, I'll post some pics. It's a long term ambition of mine to forge a whole carpenter's set of tools, a la Mastermyr. With the recession here in Ireland, I might just have the time...
  13. Thanks for those replies. I'll give it a go and see how I get on. I think the springs I have are not that old, and so probably even poorer quality steel than some of the stuff you guys in the States have. I have a few files as well, so might try both and see how they compare.
  14. Hi, I am hoping to make some hook tools for a pole-lathe for turning bowls this weekend. I picked up a few pieces of leaf spring from a scrap yard today. Do you think the steel generally in these car parts should be okay for making gouges and hook tools for turning, or is it really a hit-and-miss thing with scrap steel? I have no way of finding out the carbon content other than the usual temper and file method. Any thoughts? Cheers, Declan
×
×
  • Create New...