Jump to content
I Forge Iron

DenK

Members
 View Profile  See their activity

  • Posts

    34

  • Joined

  • Last visited

 Content Type 

Everything posted by DenK

  1. DenK
    Color Magic stains?
  2. DenK
    Nice photo for 1948!
  3. DenK
    So,what's the project?
  4. DenK
    Thanks guys...I should be able to handle that.....maybe! lol
  5. DenK
    I don't know the technical name for it,but does anyone know where there may be a design(BP) of the vise-type device that has a hardy hole on one end that attaches to the lower die of a power hammer? It's for using different hardy tools on an air hammer. TIA
  6. DenK
    But isn't sucker rod a hollow tube?
  7. DenK
    I wouldn't mind having some of that wood for handles. :)
  8. DenK
    You could even find an actual picture that you like and a good tat artist could work something up for you.
  9. DenK
    I've never used a video camera for blacksmithing,but I have for golf.Usually no one has to tell you what you are doing wrong....you can see it instantly.So I would say that using video for anything would be a great idea,including smithing. Good luck.
  10. DenK
    Nice work....I hope to be that talented one day. :)
  11. DenK
    I use one,with a dimmer switch to control the blast.Hopefully it won't burn up the motor.If it does,then I'll be hand-cranking. :)
  12. DenK
    I was told to use light weight oil,not heavy grease.Might give it a try before you do anything radical.
  13. DenK
    Still in the bag,out of the weather.
  14. DenK
    Looks good,Jose.Thanks.I should be able to make one.:)
  15. DenK
    So does anyone know of a BP to make a ball swage?
  16. DenK
    What the heck,I ordered one.Can't be that bad.
  17. DenK
    The general rule of thumb for chimneys is the top has to be atleast 2' taller than anything 10' or closer.Also,high atmosperic pressures cause chimneys not to draft,so you may want to try your fire after the weather changes.
  18. DenK
    If al else fails,go to a hammer-in if you can find one.People tailgate all kinds of stuff at these.
  19. DenK
    It DOES work well...that's what I use.I put the brake drum firepot in an old BBQ grill,and hooked it up to an older shop vac on a dimmer switch.;)
  20. DenK
    I'm not too good cutting with a torch,and I'm too poor to have a plasma,so I might hack on it with a cut-off blade in my 4&1/2" grinder.But yes,I liked your idea,Curly
  21. DenK
    Could you just weld it onto an old hammer head?
  22. DenK
    Cool idea,Curly.What's best for cutting pipe?
  23. DenK
    Ok so is it necessary to use a ball pien hammer to start/form the dish-out?
  24. DenK
    Alright....thanks everyone
  25. DenK
    Ok,see if I can get this.....are you guys saying to use wood that is just flat,or has it been dished out?
×
×
  • Create New...