K.C.

If you use .016 copper there is no need to heat in your forge. you can texture them cold and put them on the stem. when you tighten the fastener start at the center petals and shape with needle nose pliers. when its all shaped how you like it you can apply SLOW heat to change the color of the copper to taste. a shot of clear coat will make them look really nice too.

I think that will look great. I'm sure you will do well. Keep posting pics!

Nice job. I've forged a couple of tomahawks from ball been hammers, lots of work.. but tons of fun! What kind of handle are you gonna use?

Thank you guys.

Please let my know what yall think of these.. I use copper, brass, and tin sheets mounted on 3/8's square bar. Thank You

All kinds of round, flat, square, and what ever else you can think of.. I was picking up metal for a work project and couldn't help but day dream a little... So.. How long would it keep you busy? What would you start with?

-Wisdom is forged from a life well lived-

So I went to a auto swap meet in search of a 12 bolt posi for my 68 Camaro. I didn't find a rearend but walked away with these beauties and only spent a hundred bucks. I've never seen one with pipe jaws.. 4". & 6" jaws.

Here are mine- 475# German on pecan countersunk in a half inch- 300# HB on a big chunk if some sort of hard wood.. No countersink but wedge bands on the side- And a hundred pound no name on oak with a half inch sink.. I need hold downs on this one still.

I have scored all of my anvils on the TX side of craigslist. I looked on ur side of CL and found a few you should be able to get for around 300. PM Stuart. I'm sure he has a "few" in the shop he would part with... lol

Thought you guys might like to see my stamp setter. Let me know whatcha think. Holds a one inch stamp- Made from 1 & 1/2 steel- Adjustable gap for whatever you want to mark. 12 inches long and six inches wide-

Thanks Dodge! Good eye.. That's a Wilton bullet. I was shaping the knife at work with a sander.. Yes.. I cheated.. The knife was on my vise at work. I did aquire my own Wilton tradesman yesterday with 8" jaws.. Building a stand as we speak!

This is my second knife.. The firs one I made I didn't get to finish before the show I was going to started.. It was the first thing sold, which surprised me since it was just hammered into rough shape. Please give any and all advise on this one. It's almost done. Still need to polish it up and make a sheath for it. I've been away from my anvils for a few month and am just now getting back into it.

4 & 3/4 face width. Thanks for the complement on the vise!

Cool. I also don't know what it weighs.. Two people to load it. I think around 300 pounds. It's just a bit smaller than my 475# double horn. The face is flat with minimal chipping. The front table is very worn but I couldn't pass on the price. From the tip of the horn to the back of the heel she's 31 inches and 12 & a 1/4 tall. Any weight guesses? My scale is a new glass one.. I'm scared to try and set it on there.. Lol

Picked this up today with an 8" Wilton vise.. And a milk crate full of antique tools. Any idea of the maker? Can't find a makers mark. Bottom is flat with one LARGE handling hole in the center.. A number two appears on each side of the handling hole under the horn. 139096 is on the front left foot if you were to stand in front of the horn. Wire wheeled the blue paint off each side where a mark "should" be. Nice ring with 80-90% rebound. Thank a bunch guys-

I like that bullet vise Dodge... Both stands are nifty too..

Thanks for the input guys! I made the trip. I ended up with the blower, stand, tongs, and a Champion wall mount drill press that works all for 60 bucks. When I got the blower home I oiled it and she runs as smooth and quiet as could be.. Oh I forgot to mention he had the rest of the forge less the stand and fire bowl that he also gave me! I'm going to re-work the ash dump build a stand and put a fire pot on probably tomorrow. Can't wait to fire it up.

Here's the pics I have.

I know my info is limited and I apologize in advance. I found a Buffalo Forge blower. The owner says it has a 1.5 inch opening. It turns but seems super noisy. Kinda like it has gravel in side. Lol. It still has the stand and it comes with a set of tongs for 40 bucks. It's a bit of a drive for me. Is it worth it?

Mine isn't marked like that. It's newer though. It has the England stamp and some neat little crosses on the feet. Definitely no 'X's. 102 pounds.

Great find!

I agree with lighting off the forge!

This is mine for comparison. Notice the indention on the side in the first pic close to the center & bottom of base. Does yours have a mark like that? Mine also has no pritchel hole.She is 96 pounds.