Jump to content
I Forge Iron

jhsmith

Members
  • Posts

    1
  • Joined

  • Last visited

  1. I understand this is a very old thread. I did a search for Hoover anvil and this is the only thing I found so I will comment. Shoersdaughter said " I went through the shoeing course at Cal Poly in spring 1964, shoersdaughter is correct in what she said Ralph had the anvils cast and they came to the school as rough castings. There was a mill in the shop that was used to flatten the face of the anvil, then the person buying the anvil shaped the horn to their liking with a hand grinder and drilled the Pritchel Holes. Then we had a large gas forge set up outside with built up sides of fire brick. We hung the anvils from chain and a large bar and brought them to cherry red over the gas forge. They were then dunked in brine in a large tank. My anvil also has my name stamped into the side of the anvil, some of us did that and some didn't. Over fifty years of beating on the anvil and the horn is like it was the day it was new. Didn't get quite as good a temper on the face, but it has held up well. I don't know if Doug Butler has the story of this anvil in one of his books or not, but he was at the school when it all took place.
×
×
  • Create New...