Mimosa

In fact, he gave me some pictures and explanations. Then, I did the drawings and correct them after Mark feedback. I will test it. If it works well, I will share my drawings (I am French so they are in mm). Best regards mimosa

Hello, Thank you for the contact. He is a very nice guy and helpfull. Finally, the dies from Anyang are not compatible with the Bêché (you'll find here attached the drawings). I will modify my dies in order to use homemade dies. Best regards Mimosa 55kg-hofi-combi-die-bottom.pdf

Hello everybody, I have got a very specific question. I am looking for dies for my 50kg Bêché power hammer. After many seach, I found the dies for the Anyang AN-75. They seem to be compatible. Did anyone of you tried that or has any information that could help me? Thank you in advance. Best regards Mimosa ps: (Sorry for my rusty English)

Hello, I am thinking to buy a blumax 155. Being a French citizen, I want to make sure that I will be able to perform the maintenance. Wayne, have you got a spare parts list for the blumax 155? It would be helpful in order to see if I can find all the components in France. You can send it in a private message. Thank you in advance. Mimosa

Hello all, Let me introduce myself. I'm 33 years old and I'm from Lomagne (south west of France). I built my coal forge and I enjoy blacksmithing. This is a good hobby. Since many weeks, I'm reading your posts in order to get tips.This is a very good source of informations for me. Plus, I improve my English level (sorry for the mistakes). Now, I've got two projects: build a power hammer and a workshop with a chimney (now I must run my forge out). I'll put sketches and photos later (I'm slow so do not be in a hurry with me). A bientôt (a bit of french)