StephanFowler

Members
  • Content Count

    34
  • Joined

  • Last visited

About StephanFowler

  • Rank
    Junior Member
  1. StephanFowler

    Kniyon style hammer doesnt Stroke

    I have an Oiler in the supply line so theoretically that shouldn't be the problem, it's possible though
  2. I Have a kniyon style hammer that I built a while ago roughly 100# head weight, 2 1/2 drive cylinder (Prince hydraulic) Parker pneumatic solenoid valve 80 Gallon Home depot special compressor when I first built it I had it running well, about 3 Hits/ second but I built it in my garage and didn't want to run it in the attached garage, so it's been sitting to the side until I can get my shop built out back. I fired it up the other day just on a lark and it's refusing to stroke properly, the head travels up and holds for 2-3 seconds then drops, repeatedly....... I replaced the solenoid and the selector valve and it hasn't made any difference that I can see. any ideas???
  3. StephanFowler

    Blended Style

    Had a customer ask for a mix/match of a couple of my more popular styles. He wanted the Blade shape and size of my "Slim Fighter" with a guard like my S Guard stag pieces, with an Ironwood handle whaddya think??? 8" 1084 Blade w/ Hamon Wrought S Guard and Fileworked spacer Ironwood handle.
  4. StephanFowler

    Electro etching with walmart car charger

    it is a silk screen stencil, ernie (the guy who makes my stencils) can help out with the details. I just sent him a word .doc of what I wanted and he sent me the stencil ($35.00 at the time) lightly saturate the felt on the contact pad tape the stencil down where you want it with electrician's tape making sure to protect area's that you don't want marked (or just be very careful not to contact them) Press the contact pad to the stencil when etching you need to "degauss" frequently, 3 seconds on, 3 seconds off, repeat until the etch is your desired depth. when your done clean the stencil with running water (DON'T rub the stencil, you can destroy it pretty quick like that) and spray the blade down with windex to neutralize the etch
  5. StephanFowler

    Electro etching with walmart car charger

    I have used a car charge to etch for over a year now, works great. I use a different solution for electrolyte that works well, 1 Cup of HOT water 3 Tbsp Table Salt 1/2 Cup White vinegar 1 drop DAWN dish soap (yes, it really should be DAWN) mix it up well and allow it to cool then I use a chunk of Stainless wrapped in cheap felt from wally world, the felt is only good for a couple etchs then it needs to be changed out I had stencils made by Ernie Gropstitch Custom Handmade Knives by Ernie Grospitch
  6. StephanFowler

    Differntial tempering question?

    another option Vs the water is to stick the blade into a potato up to the point that you want softened,
  7. StephanFowler

    new stuff for me

    dohh, forgot to put em up Steel: 1064 Thickness: 1/4 In / Blade: 4 In O/A: 8 In Grind: Flat / Convex Finish: Satin w/ very light scale marks Handle: Yellow Heart (similar to purple heart, but yellow) Sheath: Hand Tooled Leather
  8. StephanFowler

    new stuff for me

    i built it using plans and parts from tracy mickley US Knife Makers!, Operated by a knifemaker for knifemakers!
  9. StephanFowler

    new stuff for me

    lemme know what you think I recently build a 2x72 grinder and have been trying all kinds of new stuff the dovetail bolsters worked out decently well, the fit of the slabs to the bolster isn't as tight as i would like but its hardly noticable (i did cabinetry grade wood work for many years, im a picky SOB) the tapered tang went surprisingly smoothly, i put in all the angles and bevels at the forge and did a really pretty good job, didn't have much grinding to clean up at all a "loveless" style handle. I've been looking at a LOT of pictures lately and felt the need to try a new handle shape, this being the first one its a smidge tight for a reversed inside grip (especially with my big xxx hands) but is really comfortable in other grips, also i have been making a concerted effort to slim down my handles, i went through a bunch of my older blades and realized that i made some big xxxx handles...... I feel like I pushed myself and am happy with the results.
  10. StephanFowler

    New Dagger

    personally I would prefer it with just the cross guard, but that is mostly an aesthetic point. nice work
  11. StephanFowler

    W2 Tanto Progress Pics

  12. StephanFowler

    W2 Tanto Progress Pics

    More Pictures:
  13. StephanFowler

    W2 Tanto Progress Pics

    Updates (yes, I have been working on this...) Full page Info: Fowler Blades
  14. StephanFowler

    W2 Tanto Progress Pics

    i enjoy the filing actually, if you get a good rythme going it's very "serene"
  15. StephanFowler

    W2 Tanto Progress Pics

    Clay: The Gratuitous Pipe smoking After a quick and dirty polish with a little bit of etch