Coalforge

Members
  • Content Count

    48
  • Joined

  • Last visited

About Coalforge

  • Rank
    Junior Member

Contact Methods

Profile Information

  • Gender
    Male
  • Location
    Whidbey Island, WA
  • Interests
    River rafting, Black powder shooting, camping

Converted

  • Location
    Whidbey Island, NW Washington
  • Interests
    River rafting, SCA, Buckskinning
  • Occupation
    Agricultural blacksmith

Recent Profile Visitors

4,187 profile views
  1. 150 lb Beaudry by Barbour Stockwell (who bought Beaudry during the depression) WP_20180924_17_33_45_Pro.mp4
  2. I acquired the H frame press in a trade. Whoever built it used 1/4 by 8" channel iron and bolted it together. I got it primarily for the components and knew it would not stay in the form I received it. I have heavy I beam to make a press but I was wondering what people were using for a general shop press. I have used it to form drop handles and to hot form 1/4" plate into candle holders. I want to build a solid press before I try much more with it. I am not a knifemaker but I can see using a press with pattern dies occasionally.
  3. What size cylinders and what pressures are you folks that have a hydraulic press running? I currently have a H frame that runs a 5" cylinder at 2000 psi. The frame flexes at full pressure. I am looking at building a narrow throat C frame press and trying to figure out if I am better off using the cylinder and power supply I have or looking for something different. Thanks
  4. This is in the Deception Pass Park. I made 4 handles, roof truss braces and some other ironwork for he Cranberry Lake area on Whidbey Island in 2003 for some restoration work for the CCC's 70th anniversary. The handles I am making now are copies of a forged handle on the bath house on Fidalgo Island, north of the bridge
  5. There were craftsmen that taught various crafts to the enrollees. (see the note above from tomhw) While the buildings that housed the members were often simple, some of the work done on the structures done for State and National Parks shows some fine work and artistry. I have photos of the building where the handles will go as well as handles on the exterior doors that I am duplicating from a nearby building. As soon as I can post photos, I will. There are no cabnets in any of the buildings and the outside doors have a large double scroll that wouldn't work on cabinets. If I had something to copy, I would do it but with nothing existing at present, I am after ideas from other CCC sites. Several years ago I made handles in another area of the same park (several miles and a ferry ride away and in a different county) Those are totally different than where I am working now. The CCC was building the bridge to replace the ferry. See http://en.wikipedia....ion_Pass_Bridge 1 - This is the building that will get the handles 2 - handles I am duplicating for the outside doors 3 - inside of handle 2 4 - Handles I made several years ago in a different area of the same park I originally wanted to put thumbnails under my first post but couldn't make it work. Is there any way I can edit my first post either to include the thumbnails or so I can refer people to the photos?
  6. Thanks for all the replies. It is starting to look like the individual camps had a fair amount of leeway in what they did. Apparently I can't add photos here so I will try something else.
  7. I had an inquiry from a local State Park wanting handles for cabinets in an old C.C.C. building that is being converted to a classroom. I have not been able to find any examples of cabinet handles that might have been used in C.C.C. buildings. I am looking for suggestions or examples. Thanks See photos at post # 19 this thread
  8. One thing I have not seen mentioned here is oil the clutch! I use bar oil except for the clutch where I use 20wt. I find with bar oil, the clutch will hang up some.
  9. Hello Scott. I am not familiar with the "smithy special" anvil. I used and sold TFS anvils for a number of years. TFS (Texas Farrier Supply) makes both London pattern and double horn anvils in a variety of sizes. I was quite happy with them and I quit being a dealer due to business conditions on my end. I have one and could refer you to several owners around the northwest who use them. Daryl Nelson bought several that he uses in his school in Eatonville, WA. I feel they are a good anvil and at the time, were reasonably priced. I have been out of the retail business for several years and I don't know how prices are now.
  10. A sign in a shop i was in had a sign on the power hammer that said "THIS MACHINE HAS NO BRAIN - USE YOUR OWN!" You expressed this very well.
  11. I use only use coke and don't have a problem. A couple hints for the welding though. Your piece should be about the middle depth of the fire. If you go too far down, you are in the airflow and too high, there is not enough heat above your work. Heat the piece fairly slowly so it is hot all the way through, not just on the surface. The piece should be the same color as the surrounding fire. If it is darker than the fire, your temperature is wrong. When you hammer the weld, it does NOT take a hard blow. I saw a demo once where the smith made the weld using only a hammer handle (no head on the handle) Get the weld started, then back in the fire. Finish it on a following heat. Heavier metal actually welds easier than small stock as it doesn't loose heat so fast. For small stock, I have a section of railroad track that I set in the forge so I can be quick getting those first hits. Hope this is of some help.