Jump to content
I Forge Iron

FlorianZ

Members
  • Posts

    10
  • Joined

  • Last visited

Posts posted by FlorianZ

  1. Hey Guys,

    i am about to build my first Mini Hydraulic Press. I have been inspired from a User in This Forum who has also built a hydraulic Press with a hydraulic Jack!

    I use a 30t air supports Hydraulic Jack.

    I started to build the Press today, but i must wait for the Jack now because i dont know the exact dimension of the Jack.
    I will write here again if there is something new.

    Greetings from Germany

    post-17975-0-24217000-1305375342_thumb.j

  2. Hey Guys,

    today my 4. Knife is finished. Its a Kitchen Knife for me because my current Kitchen Knifes are very cheap. :D
    First, the Steel is 1.2842.

    Lenght: 26,5cm
    Blade Lenght= 16cm
    Depth = 3mm down to 0,2mm at the top
    Handle = Olea europea from a piece of Wood that i found in Italy.
    Hardness= The Knife is hardened by me in my Gas Forge and has a hardeness between 60 and 62 hrc
    I have a Thermometer in my Gasforge to reach the right Temperature for Hardening.

    P.s Again.. sorry for my English!

    Greetings from Germany

    post-17975-0-34897600-1304596302_thumb.j

    post-17975-0-12674200-1304596315_thumb.j

    post-17975-0-75831800-1304596323_thumb.j

    post-17975-0-19509100-1304596336_thumb.j

    post-17975-0-38138800-1304596348_thumb.j

    post-17975-0-91996600-1304596356_thumb.j

  3. Hey Guys,

    I will show you here some of my first Knifes. All knives have been created by Stock Removal with 4mm 90MNCRV8 Steel.
    But in the future, i will forge my Knife in my selfmade Gas Forge!

    Knife 1:
    post-17975-0-91513200-1303323032_thumb.jpost-17975-0-36464000-1303323040_thumb.jpost-17975-0-46763200-1303323045_thumb.jpost-17975-0-87362200-1303323050_thumb.j
    The Knife is hardened by me in my Gas Forge and has a hardeness between 58 and 61 hrc.
    The handle is an piece of Sorbus aucuparia.

    Knife 2:
    post-17975-0-86652400-1303323171_thumb.jpost-17975-0-04656700-1303323178_thumb.j
    So, this Knife is also hardened by myself in my Gas Forge. HRC measured by a friend: 61hrc
    The handle is an piece of Dalbergia nigra.

    Knife 3:
    post-17975-0-81348100-1303323189_thumb.j
    So, this Knife is also hardened by myself in my Gas Forge. HRC measured by a friend: 61hrc
    The handle is an piece of Olea europaea.

    Sorry for my small text, but my english isn´t good.

    Greetings from Germany!


  4. Florian, I really like the simplicity and functional side of your stand, what are the straps that hold the anvil down tied to ?
    Naz


    Hi,
    In the barrel is a large piece of wood. I think there is more Woot then sand ;)
    And in this piece of wood is the anvil bolted.
    This is necessary because the anvil would fall over if you try to drive with the barrel around. :D
    Sorry for my English.

    Greetings
×
×
  • Create New...