-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by GOT14U
-
-
Have you thought about one of these..I'm sure there are cheap ones around.
Nelson Manufacturing Water Bucket Heater for Dogs -
Use the existing wall in photo 1 and cut back the roof and slide some 2x6s on top of it. Sorry before that build 3 other walls matching a slope of at least a 1/4" per foot fall...Maybe even a little more do to you living in Oregon..You will be able to get away with just building three walls instead of four. If you plan on a 10' section then you outside wall will need to be 5" shorter then your existing wall. I hope this helps...If you already know all this then just disregard...good luck
edit: 1/4 inch per foot would be 2.5" my mistake...but I would go 5" my self -
thanks for this info !!
On my practice billet of wire I never got the end welded, but the weld started about an inch from the end when I tightened the wire in a vise. The inch I couldn't weld was in the jaws. That got cut off and tossed. I like the method in the photo essay better, and will try that next time.
Phil -
I'm in wide open Wyoming. About 60 miles from yellowstone...I am sure I can get the knife going just because I have help with having the instructor around. And I have seen some of these kids do it and I have a lot more WANT then they do. Do to being older and going back to college it's very different then going as a kid..lol..I am leaning towards a "full" damascus instead tho..not sure if it is easier or not. But I will have all kinds of tools and equipment at my disposal. I'm not sure why he starts us out with this project but I am also going to enroll in blacksmithing, just because this stuff really has me interested. But his class is more a welding class then anything. I really think with what advice I have gotten from you guys I can be successful to a point. I'm sure it wont be the best knife I will ever make but what a experience starting out this way. LDW.............GOT14U What part of the world are you in?
-
I have no choice it is a project that must be done for a grade....I'm sure it won't be the best but it will be done. I am also thinking of metal plates and do a regular damascus..I'm not sure which one would give a a decent chance at a good quality knife when finished..I have been doing a lot of reading up so I have atleast some book knowledge about this process even before I step in to that class. Hopefully this will help.
I suggest you start with railroad spikes, leaf spring, or coil spring, not cable. It takes a certain amount of experience to forge a cable knife. -
Wow what a great knife...very impressed
-
What great photos and step by step process. Thanks a lot for these. And thanks to everyone else for their advice...much appreciated
Here is the way I do it, Like Brian Brazeal says, It practiacally makes itself. I made 4 knives like this today, got 2 more to go then I will start cleaning them up.
Picasa Web Albums - Lyle - Birth of a ca... -
Ok I know just about na ta about making knives. But during next semester in college I will be making either a cable knife or some form of damascus bladed knife. Any tips for doing this would be much appreciated. I kn ow my instructor will have some advice but I would like some tips from guys who make blades often. He is more a welder then anything. I am a perfectionist so I am anal when it comes to certain things...So I want a knife I can be proud of....thanks in advance.
-
I guess I should introduce my self. I am a student at Northwest college in Powell Wyoming and working on my associates degree in welding. I don't know much about welding but do enjoy it. I am also learning metallurgy as well. We will be making knives next semester and that is how I came to find this forum. I was or am a carpenter by trade for the last 15 years and since the bottom fell out of the market for homes I got laid off from Pulte Homes. So I needed to find a new career. And I am still 34 years young so not to late to start over. I'm sure I will be asking a LOT of questions here so bear with me.:D
-
From my understanding the electrodes are covered in bee's wax. after a arc is striked it creates a bubble for them to weld in. That is how it was explained to me when I went and checked out the college of oceaneering in wilmington california many years ago. Sorta crazy it is that simple.
2nd knife
in Knife Making
Posted
I hope my second knife looks that good...Did you mushroom the welding rods after you put them in? I'm trying to picture how you would secure them. I haven't built a knife yet so I'm not sure about this process