wpearson
-
Posts
240 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by wpearson
-
-
-
On February 23, 2020 at 9:48 AM, Rantalin said:
This is going to be a blast from the past...BUT! are there perhaps any legacy members who recall this discussion, and recall a member offering to ship me chuck of steel to use as an anvil?
Yesteryearforge Posted April 29, 2005
Rantalin
If you would like to send me your shipping address I will send you a piece of steel in the 80 to 100 lb range suitable for pounding on. It will be either 1018 crs or hot roll.this is the conversation.
-
-
split cross
-
wire bracelet
-
look at pine ridge burners
-
fishtail final ?
-
The Radius Edge wheel is 8" in diameter and has a 5/8" arbor hole.
- Diameter = 8"
- Wheel width = 1.5"
- Arbor hole = 5/8"
- CBN (cubic boron nitride) grinding wheels are state-of-the-art for grinding high-speed steel tools
- These wheels are designed for use with bench-type grinders. 1800 rpm or 3600 rpm
- Perfect for sharpening woodturning tools (high speed steel)
- Provides a superior edge compared to the old stone wheel
- Balanced – does not require "truing"
These wheels will change the way you sharpen forever – Think razor sharp edges.
CBN or Cubic Boron Nitride grinding wheels are designed for sharpening high speed steels only and should not be used for other applications. These wheels have a 1.5" face so they are easy to use and work well with the Wolverine Sharpening System. The 180-grit wheel puts almost a mirror finish on your edges and makes them "scary sharp."
-
CBN or Cubic Boron Nitride grinding wheels are designed for sharpening high speed steels only and should not be used for other applications.
-
less air
-
grinder dust off a hot saw.
-
Sheet metal with 1" spacers
-
after 5-6 minutes it might have been to cold to hammer on.
-
your blower has a air adjustment in this picture just screw it in.
-
1 hour ago, Daswulf said:
Why Wouldn't they have added a metal ladder in the build.
Rust.
-
try tightening nut into the propane tank.
-
The stuff is "S-7 Hi-Shock Air Hardening Drill Rod - 36 In. Diameter: 3/32 Overall Length: 36" MSC Item #06095061 Had a chance to Tig Weld with this Rod today on a piece of scrap. HOLY FRIHOLIES!!! THIS STUFF IS STRONG!!
-
On 6/27/2018 at 9:00 PM, RHayes said:
For some reason I can only view the pages that show in the original topic listing. If I try to view more I get a "contact us" message. Maybe because I'm not on Facebook?
Try the reload button top left.
-
bench vise?
-
follow the picture
-
steel is missing on the fixed leg
-
Sounds like your are using to much air.
-
I believe Larry had moved on previously.
-
bullet grate?
Converting an inverted hydraulic press into a light-duty forging press
in Presses
Posted
what pressure is it running at