matto

It also looks like a Peter wright, a canedy, a Columbia, an acme, a well all the older vises at some point. I have over 40 post vise and can't name a quarter of them. Then you have to look at the fact is it all original?? That said you have a nice looking vise.

Cover it with an oily rag after you are done. Use it more. Wipe with car wax when you are done, use it more, you will always have to re apply what ever after you use it. Using it more will make the rust stay away longer.

I think it turned out great. Would be a fun shape to use

Where are you located might be some better options. I think that anvils made today you don't have to worry to much as long as it is a cast steel anvil not a cast iron anvil.

He might be from Ohio if he is around where the ruler is from. I'm with 101 Samson

Can't start using that even though I think it is a great idea, because my wife might start to use it and start doing Giants on my pull up bar. (She was a gymnast for UNL)

Looks good. Looks like it will work well for the area your smithy is set up in.

Pretty freaken awsome!! The blade looks like napped flint. Love the organic look of the blade to gard to handle flow.

I would jump on it

You should always make more on custom. It is hard to get all the supplies figured per item. When you are just starting out braking even is amazing. Most good business people all state a new business if done write will not see profit or good profit for 3-5 years. Try to start pricing on material cost as in the steel and the main handle material and the labor to make and design. Then add a percent markup last add in a shop fee for all the other stuff.

Dave, First amazing!! Second you can't flood it with pics we love picks!! Third word of mouth is the best advertising you can get!! and allows you to be more of an artist than production shop. But I think there is a time for both. My buddy does amazing with his leatherwork on the web. Has a great web page there are a lot of sight you can get free bases like Wordpress. He also does a lot on Instagram. The only thing I can tell you about pricing is don't under price your self. My cousin is a painter and when he started out he was to cheap at $500 for a 36"x36" painting after his first month or two of not selling much one of the greats in the area came up to him and asked how it was going. They started talking and the great asked why do you think you are not selling?? My cousin could not come up with an answer so the great told him it is because you are two cheap!! You need to raise your prices. My cousin looked at him like he was crazy. The great told him you are in an art style that people are expecting to pay more and pay more for quality. If you are to low they will walk away. My cousin raised his prices the next show to $1500 for the same 36"x36" and has sold out almost every show sense. No you are not painting but it works in any market. You just have to know your market, what are the prices for similar knives in your area, (if you are going to the web what are prices for similar knifes there?) do your homework and don't be afraid to price higher than you think. You can always come down. Know how to market as custom not mass produced. Use the word of mouth and repeat clients as a form of reference for your work and quality. On your web page put up a quote or two from them or this is where Instagram can help for thoughts on your work. Hope this helps some. It has helped me.

Here is a pic of mine rebar between two vises

If you are using a gas forge and you are close enough to the dragons breath to need gloves you either need longer stock or longer Tong handles.

Stop wearing gloves while you forge and you won't forget the metal is hot! Yes there are times you need a glove or gloves. But in most general forging you do not. No not wearing a gloves will not keep you from getting burned but I think it helps from getting any major ones. Nothing can get caught in them if you are not wearing them. Then I think there is a faults sense of security while wearing them. The only glove I use is a hot mill or a welding glove that I can shake off quickly if something goes down the glove.

DWS great bit of history!!

A beer can is about the size of the bore on the tube. Bad thing is I will have to start drinking from cans!! My beer comes in bottles. Will get some pics tomorrow. My father in law and I built a small cannon out of one of the tilt cylinders from my skid loader. So this one should be fun.

One of the parts pictured is not for a helve, it is for a vertical power hammer.

Biggun's I was thinking cannon barrel but know you have to be extra careful with how you plug the end.

To start forging some of the bigger stuff I was going to use my log splitter. Only type of a press I have. I also have some stock down to 1 and 5/8th inch.

Thomas do you have a couple picks of your stake anvil??

You and your family are on our list!!

I am on the same page,. Also I am hoping when Brent Bailey comes to our PBA fall conference we might play with the 5 plus stocks for something.

Have stumbled upon some 3", 3.5", 4" and some 5.75" 4140. What to do with it. Most of it is 4'-10' long. All round but one 4' by 6" round tube. Wall is about 2"2.5"thick.

Natenaaron when you are little it is more of a locking mechanism to keep you on the hood. And dad said I could ride there.

Could be a price point of any of the big three makers for sale at Sears and Roebuck or Montgomery Wards or any mom and pop tool supply. Location location location. My location $20 to $30.