Jump to content
I Forge Iron

teejay

Members
  • Posts

    65
  • Joined

  • Last visited

Converted

  • Location
    Blanchard ,Okla.
  • Occupation
    machinist
  1. If you smell something stupid burning,let go of it, its hot!
  2. I got started a little different than most from the posts I've read. I was suckered into it !My cousins and I were members of an antique tractor club at a meeting my cousin stood up and said, he has most of a blacksmiths shop and he's going to do a 3 day demo at the next show 3 months away.Altho I collected old tools I had never lit a fire!So I found the old KeenJunk web page and posted "need a teacher quick and where I was".I got 2 replys 1from the Saltfork Craftsmen pres. and 1 from a fellow that lived about 10 miles from me. I met the guy that lived close and found out he had lit 1 fire! So we started playing and trying to make something that looked close to what we wanted,and started going to the club meetings .We went to that show and had the time of our lives beating on hot steel.For some reason Mills brought a 2 1/2"truck axle.Whats that for ? We are going to make a shovel out of it!OK. 16hours later we had an ugly but usable shovel.It now hangs on my forge in a place of honor and I use it almost everyday.That was 13 yrs ago,From that weekend I came away with 2 things a passion for hitting hot steel and a friend for a lifetime!
  3. #2 tong looks like one for holding a crucible maybe,#4 tong looks like those used to hold plow shares ,the hole should line up with a hole for the mold board and hold the back of the share just a guess
  4. They work great the one I buy is 6x1 1/4 and it lasts for almost 2 years and that makes it pretty reasonable. It figures out to about $30 a year
  5. I make a smaller nail something like yours then I put a card with it called the "Christmas Nail" "Christmas Nail" It is to be hung on a sturdy branch , a branch near the trunk,a branch that will hold such a spike without being noticed by well-wishers dropping by to admire one's tinseled tree. The NAIL is known only to the home that hangs it and understood by the heart that knows its significance. It is hung with the thought that the Christmas Tree foreshadows the Christ-tree which only He could decorate for us, ornamented with NAILS such as this. wrap a piece of copper wire under the head then make a hook so it can hang from a tree.Makes a great gift for friends and family.
  6. A furnace in a house is vented usally in the wall is a vent pipe going up thru the roof. You can get free standing gas heaters that if adjusted right put off very few fumes,but it does put off some fumes. The style of heater you have is a Catalytic heater no adjustments,same as the little colman heaters and you need to have a fresh air source for safety (window ) think carbon monxide
  7. Any unvented heater will give off fumes of some kind .
  8. Jake he's been smithing for about 15 yrs mostly knives,you may know him or of him Dawnavan Crawford he's used coal quite alot. Have a question for you or Bryan what kind of smithing tools are hard to come by there? Or tools you would like to see available? Other than anvils and swedge blocks.
  9. Some books that I enjoy and find useful Practical Blacksmithing by M.T. Richardson,Manual of Blacksmithing ,by John R. Smith,The complete guide to Blacksmithing,horseshoeing,carriage and wagon building by Prof. A.Lungwitz and Charles Adams, Ornamental Ironwork,guide to design,history,and use in architecture by Susan and Michael a really good book! Jake would be very interested in seeing how the Healy coal is I know someone n Wallisia trying to get some .
  10. That Wilton vise is now made in China and is cast iron and not worth what they are asking!The nut for the screw strips out real easy if over tightened. We have had to make new nuts for 3 of them where I work.
  11. Jayson my shop is about 20mls from the FAA center.I'm sure we can set a date for you to pick up a hammer and even hit some hot steel while you are here. Send me a pm and I will give you contact info. TJ
  12. Wood workers use a corner chisel,why not make one for steel?
  13. The one I worked on was 150lbs had good rebound, but rang a little more than my hay-buden. The corners were very sharp and needede to be rounded over some a nice anvil all around
  14. I just finised the ren faire in Norman,Okla. what we sold was ornamental roses,feast ware or fork,knife and spoon,crosses did I say crosses? lots of them from the small split ones to good size wall crosses they sell well. heart hooks,take double headed nails flatten out and sell as swords a buck each.
×
×
  • Create New...