Jump to content
I Forge Iron

101 H-B

Members
  • Posts

    118
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Location
    New Jersey

Recent Profile Visitors

2,821 profile views
  1. You have an Old English style built up anvil made by the New York City leg vise maker Joseph Goldie. He made more leg vises than anvils, but a few are around. he made anvils and vises in New York City around 1840-1850
  2. The pictures you posted are a high quality forged German anvil, very possibly named Original PFP (Paul Ferdinand Peddinghaus) Definitely buy it if the price is right and you like the pattern (form/features) This is not one of the newer ones where the quality is questionable. It is drop forged in two pieces and welded at the waist, which dies not compromise the quality. Anything around $500 is a fair price.
  3. You are correct, it's an AMERICAN anvil made by the American Wrought Anvil Co., Brooklyn, NY around 1900, give or take. A very good usable anvil. It looks like yours is one of them that is also marked Dunn & Murcott, Brooklyn, NY (below the name American) You might want to wire wheel it, would look great and the name will come out more clearly.
  4. https://www.facebook.com/groups/654532281280478/permalink/1133810346686000/
  5. Hi Charlie, I'm very interested in the Williams anvil. Sent you a PM, thanks
  6. American was in business from about 1888-1912, they were an independent company not related to Hay-Budden. Hay-Budden did stamp many hardware company names on anvils for customers but didn't make any stamped American.
  7. I see something on the right and left at the waist, circled, where a weight number might be. Not sure, but maybe.
  8. Yes, looks like a PW, a bit of the weight numbers are still visible on the side with the horn facing right. The serial number on the left front foot looks to have been stamped by Hay-Budden, it's their font and size. Most likely repaired by them, they put their serial number on repairs. In that case the repair was done around 1901 per AIA.
  9. Late to this thread, but it definitely looks like an American brand anvil.
  10. Here's how I mounted a similar firepot on a side draft forge using 1/2 and full height firebrick within a metal top/tray, could also be done on a metal base. Drawings included, wish you success!
  11. 1910 per Postman's Hay-Budden chart in Anvils in America
  12. Randy, I'm not aware of any purpose for the leaning profile, and haven't seen any explanation. None of Hay-Budden's advertising illustrations I've seen show a leaning profile. I always took it as a little off the intended form, one of the results of the rising cost of labor or possibly less experienced workers. I think I've seen another thread about a leaning H-B on IFI before, but couldn't locate it. I found a couple images, but I know I've seen more. We see a lot of anomalies in forged anvils even from the most reliable companies. One of the things I like most about forged anvils is that they're all one of a kind.
  13. After the March 3, 1900 fire that destroyed the Hay-Budden factory, they came back to ever increasing demand adding a 2nd shift and tripling output. It would not be surprising to have increased weld failures at the waist during training so many new workers. Also likely this was the period when the leaning profiles and other odd forms came out of Hay-Budden production.
×
×
  • Create New...