gonefishin Posted January 5, 2017 Share Posted January 5, 2017 I have a forge very similar to the one in the below photo (photo taken from google), and a buffalo forge hand crank blower. What is the proper type of duct needed to attatch the blower to the forge tuyere, and how to clamp it on? Have to run to Lowes tomorrow and unsure what I should be looking for to get this hooked up. thanks Quote Link to comment Share on other sites More sharing options...
C-1ToolSteel Posted January 5, 2017 Share Posted January 5, 2017 I just use a cheap semi-rigid foil pipe from Lows. It's one of those accordion styles, but less flimsy as the floppy ones. For attaching, duckt tape seems to do the trick. Quote Link to comment Share on other sites More sharing options...
Tubalcain2 Posted January 5, 2017 Share Posted January 5, 2017 some folks use dryer vent tubing, but i don't care for that. i have a similar forge and i use 3 1/2'' flexible truck exhaust pipe and it works great. its all steel and very study. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted January 5, 2017 Share Posted January 5, 2017 Yes. (or anything that works---went on a campout once and forgot my flexible exhaust pipe----a leg cut off a pair of bluejeans and kept wet worked!) Generally held on with duct tape if it's a rigid item and a hose clamp if it's flexible. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.