New axe maker Posted November 28, 2016 Share Posted November 28, 2016 Made a incense burner thingy today. Out of 3/8in flat stock. I tried to make a feather but it ended up looking like a leaf. I hot cut the veins before I used a grinder with a cut off wheel to cut them out and widen them before I did the final work with a standard grinding wheel. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted November 28, 2016 Share Posted November 28, 2016 Cool design. It'll be going in my inspiration folder. Quote Link to comment Share on other sites More sharing options...
Frosty Posted November 28, 2016 Share Posted November 28, 2016 I like it, well done. It needs a little more length to catch ashes but other than that I think it's very marketable. Leaf, feather, hand, etc. would all look good. Cool idea, how about a demo at the next meeting? Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
New axe maker Posted November 28, 2016 Author Share Posted November 28, 2016 I tired it out on a few different incense my fiancé has and it seems to be the perfect length. But it does need to be a bit longer. I'll see about doing a demo at the next meet. I'll need to find more flat stock and sharpen my chisel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.