njanvilman Posted December 18, 2014 Share Posted December 18, 2014 I went to a preview of an Estate Auction in Port Newark, NJ today. Definitely falls into the category of heavy iron. I am standing in front of a 13? yd clamshell scoop, used for dredging in NY harbor. They say it weighs 24,000 lbs. Lots of anchor chain. Some parts out of a big crane. The gear is about 8' diameter. Anchors. From about 1500 lb to 3000 lb. Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 18, 2014 Share Posted December 18, 2014 Any of the chain wrought iron? Link to comment Share on other sites More sharing options...
njanvilman Posted December 18, 2014 Author Share Posted December 18, 2014 The oldest chain there is probably from the 1930's....cast steel chain. There was a lot of DiLoc chain made by Baldt in Chester, Pa. Also steel, forged by a unique process, discontinued in the 1980's. Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 19, 2014 Share Posted December 19, 2014 Used to be a nice piece of WI chain up that way across the Hudson at a place called West Point; but they get so bent out of shape if you ask for a piece of it... Link to comment Share on other sites More sharing options...
Jim Coke Posted December 19, 2014 Share Posted December 19, 2014 Greetings Josh, Your going to need a bigger truck... 24k ... That's alot of iron... Neet selfie.. Forge in and make beautiful things Jim Link to comment Share on other sites More sharing options...
2ndChanceCowboy Posted December 19, 2014 Share Posted December 19, 2014 I'd love to have that anchor n 8ft gear. Yep, everyone at West Point an the House of Cards. Get a nip edgy about most anything. Except all the waste they pour into underground n ISS endeavors since the 40s. I'd gave most anything to have been at that auction. Yet ma wouldn't share that thought.lol Thanks for the awesome pictures fellow smith. Link to comment Share on other sites More sharing options...
DSW Posted December 19, 2014 Share Posted December 19, 2014 I'd love to have some of those big buoys shown in the back of the pict with the chain. I'd love to turn a few of them into replica horned mines and sink them up where we go to do our SCUBA classes. The big anchors and chain would look good there as well. Come to think of it, most of what I see in those picts would look good if we sank it there. Link to comment Share on other sites More sharing options...
Frozenforge Posted December 19, 2014 Share Posted December 19, 2014 The gear is really cool. The steel bouys can be made into a neat freestanding firepit/stove. Cut out a door, forge hinges, hardware and door frame. A chimney, some legs and voila! Link to comment Share on other sites More sharing options...
Frozenforge Posted December 19, 2014 Share Posted December 19, 2014 The gear is really cool. The steel bouys can be made into a neat freestanding firepit/stove. Cut out a door, forge hinges, hardware and door frame. A chimney, some legs and voila! Link to comment Share on other sites More sharing options...
JNewman Posted December 21, 2014 Share Posted December 21, 2014 Lots of neat gear. Thanks for sharing pictures it would have been a neat auction to go to. But that's only medium sized chain :rolleyes: I just finished a pattern for some cast steel dragline chain, each link is 31" long and 517lb Link to comment Share on other sites More sharing options...
njanvilman Posted December 22, 2014 Author Share Posted December 22, 2014 Lots of neat gear. Thanks for sharing pictures it would have been a neat auction to go to. But that's only medium sized chain :rolleyes: I just finished a pattern for some cast steel dragline chain, each link is 31" long and 517lb I would love to get just one link of that chain for the museum. Possible? Link to comment Share on other sites More sharing options...
JNewman Posted December 24, 2014 Share Posted December 24, 2014 I think it would be possible but I suspect you would be looking in the neighbourhood of $4-5000 for a link plus shipping. They are a high manganese alloy for wear resistance. If you are still interested PM me and I can talk to the customer and get an actual price. Link to comment Share on other sites More sharing options...
njanvilman Posted December 24, 2014 Author Share Posted December 24, 2014 The anchors in the photo above sold for $6000. The pile of anchor chain sold for $2500. None of it came home with me. I will get the prices of the other stuff and post them. JNewman, I would love to get a link, but at that price I think I will pass. Thanks anyway. Link to comment Share on other sites More sharing options...
njanvilman Posted December 24, 2014 Author Share Posted December 24, 2014 I just got the results of the other stuff in the above photos. The 13 yd clamshell bucket sold for $40,000. The pile of crane parts sold for $8000. The other pile of crane parts for the same crane sold for $20,000. I guess this stuff was not scrap. All of the parts will be rebuilt and reused. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now