Dominick Posted November 25, 2014 Share Posted November 25, 2014 " Falling Apart at the Seams " Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted November 25, 2014 Share Posted November 25, 2014 Details? Link to comment Share on other sites More sharing options...
Dominick Posted February 1, 2015 Author Share Posted February 1, 2015 " Falling Apart at the Seams " I made this piece last year from 1/8 flat stock.It was forged from one piece and welded to the stand. I used a small grinder to polish it .made the slices with a cutoff tool and then bent each piece for the effect shown. After all of that I clear coated the entire piece. It stands about 12 " tall. Was kinda apprehensive weather or not to make the slices but in the end I am very happy I did. You never know if you are going too far sometimes....It can ruin the piece.....Sometimes you just got to say @#$ it and go for it...... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now