Stormcrow Posted October 30, 2014 Share Posted October 30, 2014 Been playing around with a black oxide finish that I'm really digging and plan to be using more in the future. These are the first two knives that I've sold with that finish. Benghazi Warfighters in 5160 with black Tero Tuf handles and flared stainless tube rivets, black Kydex sheaths. One went to Australia and the other to Canada. And what the blades looked like without the black oxide. Link to comment Share on other sites More sharing options...
eggwelder Posted November 1, 2014 Share Posted November 1, 2014 how do you do the black oxide? i like the black (ish) finish, and try to get it on my blades. usually turns brown and mostly by luck. is it a chemical process? Link to comment Share on other sites More sharing options...
gearhartironwerks Posted November 1, 2014 Share Posted November 1, 2014 I'm ok with the look either way. Both are appealing to me. My only concern would be the longevity of the oxide treatment unless it's baked on. There is a company in Portland,Or that does spray and baked on finishes for some of the big, high volume production makers. I haven't taken the owner up on his offer to try it but will one of these days. Question: I assume you are doing your oxide treatment in your shop? If so, will you please explain how you do it? thanks, John Link to comment Share on other sites More sharing options...
Stormcrow Posted November 2, 2014 Author Share Posted November 2, 2014 It's a simple process. It's a chemical solution from Caswell. I dip the whole knife in for a while, rinse it off, then brush on the sealer that came with the kit. Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted November 2, 2014 Share Posted November 2, 2014 We did gun blueing at the gunsmith I worked at for awhile. Some steel alloys, or hardened parts would come out with a reddish hue, and Brownell's sold a desperate salt for those. Birchwood Casey , DuoLite, and others make solutions for black oxide. Some are a cold process while the one we used was done hot 292°F. The biggest thing we found affecting longevity was the final finish. Too smooth, or sealed by power buffing didn't last nearly as long as say a 230 grit hand finish. Stormcrow have you ever tried Parkerizing? Link to comment Share on other sites More sharing options...
Aden Cassidy Posted November 2, 2014 Share Posted November 2, 2014 ahhh, my neck of the woods. Where about is Aus did you send it Stormcrow. Also you might like a few things on Australian blade forums, have some ABS JS's here now among them. Few of the blokes are on here as well. Some of the work and inspirations on there is awesome. engravers, jewellers/knifemakers, sheathmakers to name a few of the craftsmen on there. Link to comment Share on other sites More sharing options...
Stormcrow Posted November 4, 2014 Author Share Posted November 4, 2014 Biggundoc - Nope, never tried Parkerizing. I got turned on to the Caswell finish by seeing it on Daniel Winkler's Winkler II lineup, and then seeing the process on their website. Aden - It went to a suburb of Sydney. There certainly are some talented smiths down there. :) Link to comment Share on other sites More sharing options...
Benton Frisse Posted November 4, 2014 Share Posted November 4, 2014 Are there more of these available? Link to comment Share on other sites More sharing options...
Stormcrow Posted November 5, 2014 Author Share Posted November 5, 2014 Not right now. I'm actually on hiatus from accepting new orders for forged blades while I work to catch up on the backlog of commissions I currently have. The exception being for active duty military, law enforcement, or first responders. These were left over inventory from a knife show that then got put up for sale. Actually, they sold before I got a chance to post pics, but the customers asked me what I had on hand. Got a batch of commissioned Benghazi Warfighters in the works right now, though. Link to comment Share on other sites More sharing options...
eggwelder Posted November 29, 2014 Share Posted November 29, 2014 the blackish finish i get is usually a combination of temper colours and oil from the quench. but i`ll be looking into the black oxide Link to comment Share on other sites More sharing options...
petere76 Posted November 29, 2014 Share Posted November 29, 2014 Stormcrow, Congratulations on the backlog of work. Nothing says good work like product demand. Peter Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted November 29, 2014 Share Posted November 29, 2014 You might want to explore Parkerizing. It is a simple finish to do, and just takes 15 minutes in the solution. Bead blast, and dunk, that's it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now