Jump to content
I Forge Iron

Show us your post drill


Recommended Posts

Reading the comments on the thread on post drill bits made me realize we don't have a thread dedicated to post drill picts ( well at least that I could find with a quick search this morning)

 

 

So lets see what you all have. I'm still on an inactive hunt for one for myself.

Link to comment
Share on other sites

Here are a few pics, the first is a Champion, I got at a farm auction. It was mounted to a large heavy steel work table, converted to electric with a 3/4" Jacobs chuck. It has a lever/handle to manually feed the bit while drilling. It works great as I found it, it is set to run at approximately 100 rpm, small 2" pulley on the motor, large 14" pulley on the drill. I use a huge milling machine vise to hold the work piece. The second is a very large Boynton & Plummer meant to run off a line shaft. I bought it this summer at a farm auction for $10.00 it is so big that took three of us to load in my truck about 300LBS. If I hadn't bought it it would be gone to scrap, smashed up before it left the farm, there were several scrappers there. I will find a good home for it. It is a beautiful functional drill in mint shape, just takes up a lot of space. DSW if you lived closer to me I would be happy to set you up with a post drill. Vann, that is a beautiful drill! Silver made, IMO, probably the best drills. I have a large one I rescued off my neighbors stone fence for free just had to drag it to the truck. It sat there for 50 years in the sun and weather. It took a bit of time to free up but works perfect!

post-39154-0-68164400-1410715326_thumb.j

post-39154-0-26037000-1410715408_thumb.j

post-39154-0-30929600-1410715426_thumb.j

post-39154-0-81449000-1410715438_thumb.j

Link to comment
Share on other sites



Vann, that is a beautiful drill! Silver made, IMO, probably the best drills. I have a large one I rescued off my neighbors stone fence for free just had to drag it to the truck. It sat there for 50 years in the sun and weather. It took a bit of time to free up but works perfect!

 

Thanks Direwolf. I agree, Silver made great looking post drills. Here's a more recent photo (I couldn't find this last posting)

post-50372-0-96309900-1410730343_thumb.j

Here I'm experimenting with colours on the flywheel (I don't like any so far !). This is almost all I've got at home so far, until I arrange for the third (and hopefully final) shipment.

 

Cheers,  Vann.

Link to comment
Share on other sites

This is my Canadian Blower & Forge No.61 (almost identical to a Buffalo Forge).

post-50372-0-63477400-1410732334_thumb.j

It's made from two wrecks (both CB&F No.61 post drills).

The first was missing auto-feed lever & pawl, column, column foot, table. Three of the four flywheel spokes are cracked.

The second was missing the crank arm & handle and the table. The frame was broken in half, the thrust bearings had mostly disintegrated, and the ball races were so badly worn they were unusable.

Here's the first one partially dismantled.

post-50372-0-59386300-1410732468_thumb.j

While the other was broken through the middle, this one had been as well, as this braze repair shows

post-50372-0-76914600-1410732527_thumb.j

I found that the pawl on the auto feed lever had lost its ball (counter-weight) so the pawl doesn't engage. Here it is removed, awaiting repair.

post-50372-0-23768400-1410733227_thumb.j

So, I still don't have a table, nor a working auto-feed. I have it mounted above a bench in my woodwork shop, where I occasionally use it to drive a Fortner bit.

 

Cheers,  Vann.

Link to comment
Share on other sites

Mine is a Bailey's no 4 from the Illinois Iron and Bolt co. I was going to paint it, but I have too many other projects going on. I was wanting a smaller one, but none of the ones that I've found were complete. This one is 150 lbs. I just got this mounted today, so hopefully I can take it for a test drive this week.
20140914_204441_zpspa5geb0a.jpg

Link to comment
Share on other sites

  • 1 year later...

some of mine , oh and my drill bit collection as well. i have another 612 buffalo in pieces, once i mount them all i will post photos of them completed, so many projects so little time.

have found a Sears post drill for sale , i don't have a Sears { yet}

BuffaloPost Drill Press 13.jpg

BuffaloPost Drill Press{2} 001.jpg

BuffaloPost Drill Press{2} 024.jpg

Champion Post Drill #92 (0 (3).jpg

Champion Post Drill #92 (11).jpg

BuffaloPost Drill Press 23.jpg

Post drill bits (1).jpg

Post drill bits (2).jpg

BuffaloPost Drill Press{615} (2).jpg

Dawn Post Drill (5).jpg

Link to comment
Share on other sites

  • 2 weeks later...
  • 6 months later...

Found this Champion while "junk shopping" it was laying out in the back grown over by weeds. It followed me home after leaving a fifty dollar bill with the owner. It was mounted on 3 1/4 inch angle iron and a big truck brake drum base. All I had to do was spray it with WD-40, oil it and put it to work. I use my newfangled drill press but if the Apocalypse comes I'm all set.

658mtt.jpg

 

34yaa8z.jpg

Link to comment
Share on other sites

  • 1 year later...

When I admire the dedication required to restore, clean or otherwise make work again this museum pieces, (I am a great fan of the Ford model A) if it comes to drill holes, I wouldn't use those contraptions if you paid me to do so. They are unsafe, slow, large footprint, weight a ton and do the job of a $50 handheld drill ten time slower. 

I concede they are nice to look at :)

46654549_10155769000620598_2668442547981

Link to comment
Share on other sites

  • 1 month later...

 

lol, they also prove just why blacksmiths back in the day punched holes.  :) I have a canedy otto like above. I ran it off a 1?4 hp motor. It needed bushings and the main shaft sorta wobbled. It was great for re-centering off centered center punch marks,,, just cant yer iron and walk the hole where it should have been... 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...