gearhartironwerks Posted August 23, 2014 Share Posted August 23, 2014 Hi, This blade was made from additional material in a billet that a previously posted blade was made from. It's a little smaller than its big brother at 7.25 oal with a 3"+ blade. The lower 2 layers, and the top layer of the 4 bar twist are 375 layers each of a 'w' pattern. The lower layers began to wander and that has given me the idea to try to distort them even more on a future blade...sort of like a wandering feather pattern. Critiques/comments always welcome. Thanks. John Quote Link to comment Share on other sites More sharing options...
mike-hr Posted August 23, 2014 Share Posted August 23, 2014 That's real pretty, and a good design. I'd be proud to get elk blood all over it.. Quote Link to comment Share on other sites More sharing options...
Mainely,Bob Posted August 23, 2014 Share Posted August 23, 2014 Sure do like that pattern. Looks like it is the sort of work that your grandchildren will be proud to put to work. It should still be going strong long past then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.