i need help again :)with air power hammer

[jk_king]

Originally Posted by Glenn

jk
Go to the top of the forum page and click on user cp
click on edit profile
go to the bottom of the page, enter your location and save.

We would like to know where in the world you are located.

Go to the IForgeIron gallery where you found this image and click on the image to enlarge it to the side that was originally submitted.

Search the gallery for Beche and there are several hammers listed.

Dear Glenn,

I'm sorry about that and thank you so much for your kinds and helps.

Kind regards,
jk_king

[jk_king]

Originally Posted by John N

jk, unless you are an engineering god I would not try to design / make one of these yourself. you can buy a Beche clone (anyang / striker) for less than the materials will cost you to build one from scratch.

There are a lot of little subtlties to the design of this seemingly very simple hammer that makes them work. If you dont understand them the hammer will not work properly. ever.

If you are looking to make hammers as a commercial enterprise contact me by PM and I may sell you a design & manufacturing drawings for a hammer, depending what your plans are.

Dear John,

Thank you for your suggestion about how complicate of the self contain air hammer than other systems air hammer and thank you for your kind.

kind regards,
jk_king

[Valentin]

Well... i think that the picture was taken from the user's, manual of the hammer...getting your hands on one is nice.Every hammer had to come with one...Maybe u can find one on ebay or to sombody that has a new hammer or an old one bought from the factory

[Madmike]

Hi everybody, Madmike, new member from France... Don't have much time to introduce myself but I'll do it as soon as I can
Just to add a link to a Belgian homemade self-contained airhammer Upper right one
@ JK : You would have to make both at once a hammer AND a compressor...

Edit : I didn't see it before but it seems to have been discussed here Hydraulic cylinder question?

[jk_king]

Dear Madmike,
Thank you very much for your kind and made the links for me that is very usefull for me to calculate the volume in the cylinder both of hammer and compressor.

Regards,
jk

[şahmerdan]

hi,
I need a help for beche 100 kg, documents and pictures.
I need it's original pictures.
thanks,

[Valentin]

i haven;t found any yet

[Kallsme´n]

What litterature and picture do you need?
Hope this will help you a little

Kallsme´n