I Forge Iron
Blacksmith and Metalworking Forum
Lucky? Find?
This is a discussion on Lucky? Find? within the Welding forums, part of the Welding / Fabrication category; R. Funk, Do we as blacksmiths follow all codes? I would certainly hope so. Codes are not suggestions or ideas,...
| |||||||
| Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
05-04-2008, 12:48 AM
| |||
| |||
 R. Funk, Do we as blacksmiths follow all codes? I would certainly hope so. Codes are not suggestions or ideas,nor are they rules to be bent or broken,winked at etc. Do it right or do not do it. My old johnson gasser could not be run inside, so I run it outside.  |
|
05-08-2008, 06:05 PM
| |||
| |||
| I have an odd habit of over building stuff... It gets me in trouble sometimes.
__________________ It is difficult to quiet the mind sometimes. We block receptivity by holding onto negative thoughts and instead of growing, we chose to limit ourselves by allowing these thoughts to dominate. One way to break through the cycle of negative and limiting thinking is to remind ourselves of our ideal.~ Don Fogg |
|
05-09-2008, 01:17 PM
| |||
| |||
| Something a lot of people tend to neglect is keeping welders clean, wether it has a fan or not, once a week or so (more if your in a especially dust area) take your air hose and blow them out, the dust and such that collects inside greatly reduces the cooling which is important if you want the unit to last a long time. welder19
__________________ It's better to be hated for who you are than to be loved for who you are not |
Linear Mode
