Basic Blacksmithing- A beginners guide to toolmaking

[matt993fod]

By David Harries and Bernhard Heer. Published by Intermediate Technology.

I chanced upon this book whilst browsing Amazon. I want to learn to make tools of various descriptions, so this was an especially lucky find for me.

The style of this book and short and simple. How-tos for toolmaking are presented in a very similar style to most of the blueprints on this very site. The information on technique is technically basic. Exactly what the beginner like myself needs!

An interesting point with this book is that the authors spent a lot of time in Africa with local smiths, studying the way that smiths in such areas live with just the very basics of tools and materials. All of the blueprints in the book are based on how these African smiths make the various tools listed, from scrap sources. This is particularly useful for those smiths who make things from scrap exclusively.

The book even includes information on how to make an anvil from a section of railroad track, how to make a simple forge from clay, or bricks and how to make a bellows from leather or goatskin.

I would recommend this book to the beginner like myself, simply because of the uniqueness of its approach, and the fact that it provides the very basics of instruction without the confusing verbiage that is often the opinion of the author, thus saving the reader confusion down the road.

[AtomicForge]

Well i just ordered the book from Amazon so i hope it can help get me started. I still need to build a forge and get some railroad track.

[WagonMaster]

I'll get me one of these books soon as I get the cash flow , flowing again. Plus theres a couple more books I want to get. Thanks for sharing your thoughts on this book with us..

[GNJC]

Hello WagonMaster, you can download the book for free from these addresses:

http://ftpforge.chez-alice.fr/Blacksmithing.pdf

see below

Hope the information helps.

[AtomicForge]

Wow GNJC that its illegal what you have their it is a pirated copy, a moderator should delete this or this entire site has a risk of geting shut down.

[GNJC]

I’ve removed the links for the time being. I'm an English lawyer so I don't know a great deal about the legal status of presenting links in the US.

However, I suspect that since US law is as practical and full of common sense as any other Common-law jurisdiction, the inclusion of a link to a third party jurisdiction (the websites in question are French) is unlikely to incur the wrath of the authorities when the link is legal in its country of origin.

Having written that, all countries have a scattering of strange legal rulings; so I await a more informed opinion.

Should you be right, how about starting a list of websites to avoid?

[Glenn]

I have contacted Atomic Forge off line and requested additional information concerning his comment.

GNJC please repost the 2nd link as it was not in question.

[kovacija(blacksmith)]

for me it is hard to get blacksmith books (intercontinental) so this version really helps!
thanks GNJC!!!

[Glenn]

Atomic Forge and I have exchanged notes on the subject and I understand his concerns. We appreciate peoples concerns on copyright and other issues bring brought to out attention, and we try to address those concerns on an individual posting basis.

As of May 1, 2008, the United Nations has 192 members and the US State Department recognizes 194 independent countries around the world. It is a little beyond the scope of this site to police the internet or to contact everyone evolved to see if they have permission to do what they do, and if it is legal to do it in THEIR country.

[ericthered]

Thanks for the link. It answers a bunch of questions in plain language some of the other books don't.