Assistance with French Antique

[Grim]

Hello. I'm needing to be pointed in the right direction. I've got a project with a decades-old alambic that requires a retro-fitting (all copper pieces and piping). The copper isn't so much the problem, as finding someone who is willing and able to tin the pieces in the proper way to reproduce the 100-year-old configuration. I've included an image that can, perhaps, shed some light on what I'm envisioning. Any and all input is greatly appreciated. Thank you so very much.

[Grim]

PS - If I should refrain from soliciting help this way, please feel free to contact me by PM.

[ThomasPowers]

Find a really fancy cooking store or restaurant and ask them who does re-tinning of pots. The fancy copper pots are tinned and it does wear through and have to be re-applied on a semi regular basis. Some places will host a tinning day where an expert will re-do a bunch of pots brought in for it.

Basically the process has been pretty much the same for the last 1000 years, (you can read about tinning objects in Theophilus' Dives Arts written in 1120 C.E.)

[Jose Gomez]

Where are you? If you let us know someone might be able to direct you to someone in your area.

[MooseRidge]

Looks like youre working on a still.......

[ThomasPowers]

I believe he mentioned that he was a distiller in his introduction post. As we don't know *where* he is at; he may be living somewhere where the US laws do not apply.

[Grim]

Originally Posted by MooseRidge

Looks like youre working on a still.......

Yes, I am. And the alembic/still is going to be registered as equipment in an approved, bonded DSP (Distilled Spirits Plant)... blessed by the Alcohol Tobacco Tax and Trade Bureau. The location is around Albuquerque, NM.

Mr. ThomasPowers: The alembic is rather large; does the technique for tinning or re-tinning piping and long sections of curvaceous cooling tube (serpentin) match that of small pots or cookware?

I should say that I have found an expert in 18th/19th Century copperwork that could probably help, but being that he is a small outfit and usually quite backlogged, the wait could be troublesome. I still remain positive... as he's wonderfully gracious, kind and passionate about his craft, just very much overwhelmed with the demands of multiple projects. I've no doubt I'll be working with him on numerous other pieces, but I'd do well to find others who are as interested and capable of helping.

By the way, I'm very gracious for the attention my question has already received... so thanks to the each of you.

[ThomasPowers]

Grim; I'm in Socorro NM and can ask around at the SWABA meeting in Santa Fe June 7th. As I will probably see a lot of the people involved in the NM metal scene up there they may be a chance for another local source!

[Grim]

That would be amazing! Is the SWABA meeting closed to the public?

[ThomasPowers]

No SWABA is an affiliate of the Artist Blacksmith Association of North America, ABANA, and meetings are free and open to the public. Our next meeting will be in Santa Fe, and will start at 9am MDT. Directions and details can be found here SWABA.

Meetings usually consist of a smithing demo, a potluck lunch and a raffle of items related to smithing donated to help support the group (known as iron in the hat), if I have any new, "pretty" tongs or hammers they've come from IITH!

I'll be driving up from Socorro and plan to visit the Black Hole (sort of a scrap yard) in Los Alamos after the meeting.

Oh yes, I'm currently VP of SWABA, Hope to se you there!