The rules are simple

[Glenn]

Use the materials suggested in any way you wish to make a project. You may use some or all of the materials. You may add other elements to complete the project, but the suggested materials must be a major portion of the project.

You may cut, fold, spendle, twist, warp, draw out, upset, weld, or otherwise convert the suggested materials to your liking. But once you start, you can not say oops, I messed up and start over, you have to deal with the oops. You are encouraged to make two or more of a project, a set of things, or several different projects from the suggested materials, just do not exceed the materials list. For instance a 20 foot piece of stock can be cut into 1 piece 20 foot long, 2 pieces 10 feet long, or 20 pieces each 1 foot long to make projects, that is your choice. But you can not use 23 feet if only 20 feet is on the list.

Then post photos of your project and some information on how it was made. It would be nice to have these available for conversion into a blueprint so take lots of photos as the project is being built and submit them for a Blueprint.

If you have suggestions for a materials list, let me know. Comments on the projects are encouraged as this can be a challanging way to exchange information and ideas.


Edit: time limit removed