I Forge Iron
Blacksmith and Metalworking Forum
April/may 2008
This is a discussion on April/may 2008 within the Monthly Projects forums, part of the Blacksmithing category; The blade ended up around 8 or 9 inches. I cut the shorter of the two prongs/jaws off, as I ...
| |||||||
| Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
05-30-2008, 12:10 AM
| ||||
| ||||
The blade ended up around 8 or 9 inches. I cut the shorter of the two prongs/jaws off, as I could not figure out what else to do with it. It was definitely large 
__________________ carpe malleus pax pt  |
|
05-30-2008, 12:49 PM
| ||||
| ||||
| Quote:
Paul, 8 to 9 in! i'm gonna have to make a sword to beat that!
__________________ It is difficult to quiet the mind sometimes. We block receptivity by holding onto negative thoughts and instead of growing, we chose to limit ourselves by allowing these thoughts to dominate. One way to break through the cycle of negative and limiting thinking is to remind ourselves of our ideal.~ Don Fogg |
Linear Mode
