I Forge Iron
Blacksmith and Metalworking Forum
Rust Removal and BP0448
This is a discussion on Rust Removal and BP0448 within the Alchemy and Formulas forums, part of the Blacksmithing category; I just got a good deal on an old forge. The problem is the tuyere is very rusted and need ...
| |||||||
| Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
09-18-2008, 04:11 PM
| |||
| |||
 Rust Removal and BP0448
I just got a good deal on an old forge. The problem is the tuyere is very rusted and need to be replaced and the cover that lets the clinkers drop out the bottom is rusted solid. I wanted to try and remove as much of the rust as I could before I considered drilling out the bolts. I did a search and it mentioned Blueprint 0448 was on rust removal, Is there any chance someone has it? Or I'll take any suggestions on how to fix it. Thank you, Mark Gilg  |
|
09-18-2008, 04:53 PM
| ||||
| ||||
IForgeIron has it. I manually pull the material and get you the information. Check your pm.
__________________ Tools do not make the blacksmith, the blacksmith makes the tools. gc If you do not build a box, then you do not have to think outside the box. If someone questions your standards, they are not high enough. |
|
09-18-2008, 05:30 PM
| ||||
| ||||
|
Google for electrolysis rust removal. Here is one link Rust removal by electrolysis I have some Little Giant parts going in a tank in my shop at the moment. This process will remove caked on crud, rust and even old paint. |
Linear Mode
