Just wonering if this set up would work?

[jamisarrius]

Hello there,

I've recently decided that I'm going to join the blacksmithing community so I've decided to set up my own wee workspace and that is where the problem is.

I currently live close to the centre of Edinburgh and the only reason I have a garden is because the railway line has to be a certain distance away from the apartments so this isn't really an potion as I would have to make sure forging would be ok with 48 separate apartments.

Instead I've decided to build a portable forge, use my jewlers anvil and mount the lot on a trailer adjusted to go on a bicylce as I can't drive so that whenever I plan to forge I go for about a 40 minute cycle to the edge of edinburgh to a field somewhere to work.

What I was really wondering before I embarked on building all this is whether or not this minimal forge set up would allow me to forge small items effectively and allow me to work without any hasstle from whoever wishes to cause it?

Thanks for replies in advance.

[matt87]

Welcome! That's a nifty-sounding setup you've got there.

My main concern would be though, what size is your jeweller's anvil? Most I have seen are weighed by the gram, not the kilogram.

[Ethersin]

I'd just check your aloud, to set up where your going to go, check with the owner etc.

And it could be rather heavy to take on a bike ride.. Guess it'll do you some good though :P

I think the biggest jewler's anvil i've seen on ebay is about 3 lb's, so depending on the size of what you want to make, is it going to be big enough? and is it going to bounce around? should you plant it into a log or something to keep it steady?

I'm new to this as well.. But they were just some of the concerns i had when starting my forge up.

Good luck mate,

Rich

[Glenn]

What weight is your anvil?
What do you plan to make?
What fuel do you plan to use?

All determine the forge set up.

[jamisarrius]

Thanks for the responses so far I'm slightly more confident that it could be feasible already.

I'm starting to think I used the wrong term when I said jewler's anvil, the one I have is 14lb although I do have another but it is around 100lb so not suitable for being moved.

I'm hoping to use charcoal as I figure that with making a retort which a friend has volunteered to be stored in their garden would give a ready supply

And I'm hoping to be making shield parts, helmets, buckles, axes, spears, knives, etc. Generally re-enactment equipment.

Thanks again for replies.

[Justin Caradoc]

Just from what I have seen and used an armor shop would weigh more than anyone would want to have on a bike. even the most minimal armor shop I have used/ seen weighs 100-200 lbs. I would see if your friend who will store the retort would also let you smith there also.
just my 2cents

[Sam Thompson]

It's very difficult to see the colour of the metal (and thus how hot it is) in sunlight, so you'll need some shade. This will also help to protect you from Scottish weather.

[John B]

Hi Jami, I know of some who have tried this, but none that have been succesful.

I would suggest finding a smith in the local area, there are at least a dozen in the Edinburgh area, and seeing if you could use a corner of their facilities.

Alternatively is there a city farm or other craft based centre where they may let you set up? Friendly farmers on the outskirts who may have an empty outbuilding?

It would be more practical to have a permanent base to work from, You could work in copper from home to develop skills before moving on to hot forging as you only need to be able to anneal the copper occasionally, and this can be done with a gas blowtorch. You will learn techniques relevant to making armour, helms, breastplates etc and it does not make much noise or fumes to aggravate neighbours.

Good luck with your quest.

[ThomasPowers]

For small items like small knives and penannular brooches a single fire brick forge run of a small propane tank is quite usable---I forged the nails for my Mastermyr chest using such a set up in my basement!

[CurlyGeorge]

Sounds like the desire and ingenuity are there. Keep at it. You'll come up with a workable solution. Let us know how it's going and what you finally come up with. Take some pix to post on here. Good luck.