I Forge Iron
Blacksmith and Metalworking Forum
help with oxy fuel torch
This is a discussion on help with oxy fuel torch within the Problem Solving forums, part of the Blacksmithing category; I have all the instructions on using one and understand everything but: the settings are in psi and my question ...
| |||||||
| Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
11-12-2008, 02:59 PM
| |||
| |||
 help with oxy fuel torch
I have all the instructions on using one and understand everything but: the settings are in psi and my question is how do I set setting in Bar? and how much is it for cutting ? 2:1 in oxy? european setting are in the Bar...  |
|
11-13-2008, 12:50 AM
| ||||
| ||||
|
kovacija try this link it will convert psi to bar for you Online Conversion - Pressure Conversion Hope this helps ya Larry
__________________ Try not to spend $10.00 worth of time on a $.10 job. If you have time to kill work it to death!!!  |
|
11-13-2008, 04:12 AM
| |||
| |||
|
as always Thanks again Larry!!!  |
|
11-13-2008, 04:37 AM
| |||
| |||
|
I never set by a specific number, even on my Dillon. Unless you have very precise gauges, they are not really telling you anything but self-contained relative pressures. Set for the flame you need-neutral for welding taking into account tip size. mt
|
|
11-13-2008, 06:32 AM
| |||
| |||
|
ok so that menas if I need some sort of flame I just set it on my one?
|
Linear Mode
