I Forge Iron
Blacksmith and Metalworking Forum
Forge smoke problem
This is a discussion on Forge smoke problem within the Problem Solving forums, part of the Blacksmithing category; If you can not locate one 8" then combine 2 pieces of 6" into one piece of a larger diameter. ...
| |||||||
| Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
01-15-2007, 08:25 PM
| ||||
| ||||
If you can not locate one 8" then combine 2 pieces of 6" into one piece of a larger diameter. Your a blacksmith, you can do these things <grin>
__________________ Tools do not make the blacksmith, the blacksmith makes the tools. gc If someone questions your standards, they are not high enough.  |
|
01-15-2007, 09:10 PM
| |||
| |||
|
try google uk .stovesonline ,or spark arresters and they have a arrester that goes on a house chimny pot for thached roof houses, they are in Devon uk ,for goodness dont buy one ,thats letting the blacksmithing side down, have a good look at there picture and go for it.and olso cut the blast down.
__________________ spelling and grammer inforcer |
|
01-16-2007, 07:13 AM
| |||
| |||
|
This is a pic of my airgate. Will try and type more later on subject. This controls the blast exceptionally well. Thanks for the edit button return ! Now then, the purpose of the airgate is to control the blast. I guess I really don't know what you are using for this at the current time. THe other things suggested will of course fit your situation fine. I made this airgate from a scrapped 3" cyl. Just chopsaw a slot and make a disc and hinge/handle. Also a scrapped HVAC blower.
__________________ " It ain't real if it ain't forged " Last edited by Ten Hammers; 01-16-2007 at 07:50 AM. |
Linear Mode
