Quote:
|
Originally Posted by Hofi This Is My Anvil Designe Which I Plan To Cast Out Of 6150 Somewhere In The East Of Europ Or Chaina.
Mounted On A 1 3/4 Plat And Glued To The Plat With Sikaflex 11 Fc
To Prevent The Ringing And Get A Much Beter Rebound (reaction)
The Thre Legs Out Of 2x4 1/4'' Wall R.h.c Welded To The Plat In 22 Degrees. The Plat Is Cut In A Way That Follows The Pateren Of The Anvil Base And There Are Holes In The Plate Under The Paralel Holes In The Anvil And You Can Easy Go Down To The Ground With The Steel Every Place Around The Anvil 3-4 Pritchle Holes And 1 1/4 Hardie Hole. The Base Is Squer And You Can Upset Around The Anvil
Ther Are Many Mor Advanteges To The Anvil If Asked I''ll Explain
Hofi |
More advantages you say? I would love to know more PLEASE!