Quote:
|
Originally Posted by Ralph I have some four foot round that I plan as a base. Plan on usuing a 3 in pipe thread as the base then use a vice 3 inch flange to hold the vice?
Ralph |
I'm not sure I understand what you're saying, Ralph...
Sometimes when we write, it makes perfect sense, probably because we have a mental picture of what we're describing, that's why a picture is worth a thousand words...
Do you have a 4 foot diameter piece of plate? Going to weld a 3-inch coupler to the plate and then a 3-inch flange to attach the top end of the vise?
The plan for mine was to weld a small "table top" of 1/2-inch thick plate to the top of the 4" SQ tube and weld a stub of the right sized pipe (3/4 or 1 inch) to the base for the bottom of the vice leg to be held by.