So on the way to do some errands with the family, we drive past a garage sale. The seller is barking *real garage sale prices, two dollars for that hatchet*, said *hatchet* springs into my hand as if of its own volition, there to stay.
Then the seller says *I will make you a deal on that cart, two dollars!*. Now, I've been looking for a metal table of some sort as the basis for the MkII forge. Something waist high, about 2 foot by 3 foot or thereabouts. Maybe with a shelf. I've looked at plant stands and patio furniture, I've lusted after metal mesh cafe tables, scoured restaurant recycling stores and considered wheeling hospital furniture away under cover of darkness. This cart is waist height 18x30 inch sheet steel, heavy wide casters, quarter inch steel rod welded all around the perimeter and two bucks to boot, I could have plotzed right there. So I'm four dollars in, but having a five in the wallet, I grab from the ground a couple of V Blocks, about 4 x inches, and an inch and a quarter thick, square bottomed V groove in one long side, marked Eclipse-made in England and E 106 on the flat next to the V. I suspect they are a larger version of the little one inch V block I used to hold round things that need holes drilled in them.
Five bucks and I'm glad I had both the wife and the mini van, the cart just fit in the back,
the V blocks chocked the wheels to keep them from rolling around and we were off, I don't think we were at the sale 10 minutes.
Michael
|