Sides 3/16" by 1.5" Aluminum, Blade 1/8" by 1.5" by 24" long SS. custom made tail nut and a 5/16" carriage bolt to lock. The length will give an more accurate angle.
__________________
Irnsrgn
Knowledge must be shared or it lies dead in the mind.
The Blacksmith must use Hammer and Flame to force the iron down the path of his own choosing.
I usually find it much easier to be wrong once in while than to try to be perfect.
Last edited by irnsrgn; 07-17-2008 at 01:59 AM.
|