Quantcast Blacksmith Forum - View Single Post - Refilling propane tanks

View Single Post

  #1 (permalink)  
Old 05-30-2008, 04:53 PM
Glenn's Avatar
Glenn Glenn is offline
Administrator
 
Join Date: Mar 2005
Location: IForgeIron at Big Chimney
Posts: 5,278
Default Refilling propane tanks

Anhydrous Ammonia and Propane Cylinders

It has come to the attention of the National Propane Gas Association that propane cylinders are being used in the manufacturing of Methamphetamines. This drug is commonly referred to as 'crank'. Manufacturers of this illegal substance are using propane cylinders for the storage and the use of anhydrous ammonia. These cylinders have been found in many states at cylinder exchange and refilling locations as well as in hotel rooms and mobile laboratories, where the manufacturing of this illegal substance takes place.

As observed in the illustrations, a blue-green stain on any brass portion of a service valve is evidence that it may have been in contact with anhydrous ammonia*. The pungent odor of ammonia on or near the cylinder is also an indication. If you suspect that a propane cylinder contains or has contained anhydrous ammonia, exercise extreme caution and restrict access to the area.
It can be dangerous to move the cylinder due to the unknown integrity of the cylinder's service valve.


Read the rest of the article ---> click here and ----> click here
__________________
Tools do not make the blacksmith, the blacksmith makes the tools. gc
If someone questions your standards, they are not high enough.
Reply With Quote