I will not get into where you can end up by working cold steel other than to say it is warm. (grin).
Anything that absorbs sound is good, anything that reflects sound is not so good. Hard walls, flat surfaces, etc will reflect sound where carpeted walls absorbs sound. I doubt that you can make it sound proof but you you should be able to reduce the sound to below that of the neighbors lawnmower or circular saw at the same distance.
BP0320 Stop the Anvil's Ring
may give you some ideas on how to tone things down.
__________________
Tools do not make the blacksmith, the blacksmith makes the tools. gc
If someone questions your standards, they are not high enough.
|