Quote:
Originally Posted by m_brothers  I will most likely forge about 2/3 of it out, and then form a socket to fit onto the end of the shaft, use wood glue and two rivets or screws to hold it in place. This is more for figuring things out. I will probably try to make a historically accurate one sometime. |
Don't bother with the wood glue, it doesn't stick to metal. I made one spear head and it pressure fit the shaft so well I didn't use any other method to hold it in place. It would take a beig hammer or a fire to remove the head.
Hang on a sec and I'll look and see if I have pics.
Found it. Now let's see if I can get it attached.
ron