Jnr briefed me on constructing my welding table. I just have the ground from the permanently installed welder bolted to the table. Actually the table is welded to some 2" angle which is attached to the wall by rawlbolts. The ground is simply connected to the nut holding one of the rawlbolts in place. I never have a problem and do quite a bit of welding.
Why not just include ground straps on the clamps you use when holding work together prior to tacking?
__________________
Welcome to Rustmart.
31°0'17"N 103°39'49"E
"Nothing we make will ever break."
|